What E01 actually means
The machine can't confirm the door is locked, so it won't start the cycle.
On these Bush machines E01 points to the door interlock \u2014 the latch assembly that both holds the door shut and tells the control board it is safe to fill and spin. If the board doesn't get that confirmation within a few seconds of you pressing start, it halts and shows the fault rather than risk running with an unsecured door. Bush washers are built for Argos under a lot of different model variants, so the exact lock fitted varies from model to model; the full number from the rating plate matters when a part is ordered.
What E01 looks like on a Bush washing machine
Most people find this page having searched for what the machine is doing rather than the code itself. On a Bush washing machine, E01 usually shows up as one or more of these:
- Machine door won't open
- Door won't lock or click shut
- Door lock light flashing
- Door stuck shut with the load inside
- Won't start even with the door closed
- Not filling with water
- No water going in
- Takes for ever to fill
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- Door not fully latched \against in the seal or laundry trapped in the way
- Worn or failed door interlock \u2014 the most common finding
- Damaged or loose wiring between the lock and the control board
- Fault in the control board itself, or the previous fault still stored in memory after a lock has been replaced
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Open the door, clear any clothing caught around the seal, and close it firmly until you hear it latch
- Check the door isn't dropped or catching on the frame as it closes
- Switch off at the wall for a minute, then power back up and try a short cycle
- Note the full model number from the rating plate before ordering anything or calling out an engineer
Common questions about Bush E01
What does E01 mean on a Bush washing machine?
The machine can't confirm the door is locked, so it won't start the cycle. On these Bush machines E01 points to the door interlock \u2014 the latch assembly that both holds the door shut and tells the control board it is safe to fill and spin. If the board doesn't get that confirmation within a few seconds of you pressing start, it halts and shows the fault rather than risk running with an unsecured door. Bush washers are built for Argos under a lot of different model variants, so the exact lock fitted varies from model to model; the full number from the rating plate matters when a part is ordered.
Can I fix Bush E01 myself?
There are 4 checks you can safely do yourself first.
- Open the door, clear any clothing caught around the seal, and close it firmly until you hear it latch.
- Check the door isn't dropped or catching on the frame as it closes.
- Switch off at the wall for a minute, then power back up and try a short cycle.
- Note the full model number from the rating plate before ordering anything or calling out an engineer.
This one usually needs an engineer once you have tried them.
How much does it cost to repair Bush E01?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing E01?
This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washing machine faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Bush washing machine codes
All Bush fault codes and repairs →
What this looks like when it happens
- washing machine not spinning
- washing machine door will not open
- washing machine will not turn on
- washing machine not filling with water