What is actually happening
This is different from a machine that will not spin: here the drum does not move at all, even at slow wash speed. On a belt-driven machine the belt has almost always come off or snapped, and the giveaway is that the motor can be heard running with nothing happening. On a direct-drive machine there is no belt, so the fault is the motor or its control.
The usual causes
- A snapped or dislodged drive belt
- Worn motor carbon brushes, leaving too little power to turn a loaded drum
- A seized drum bearing
- A failed motor or motor control board on direct-drive machines
- An item jammed between the inner and outer drum
What you can safely check yourself
Work through these in order. Anything past this point — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the appliance plugged in.
- Turn the empty drum by hand — very free movement suggests a belt, stiffness or grinding suggests bearings
- Listen during a cycle for a motor running with no drum movement
- Check nothing is jammed at the drum edge
Still drum not turning?
Most of these need an engineer once the checks above are done. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Local engineers covering Nottinghamshire, Derbyshire and Leicestershire — same and next-day appointments, and the person who comes out is one of ours, not a subcontractor.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my washing machine drum not turning?
The machine fills and the cycle runs, but the drum never rotates. This is different from a machine that will not spin: here the drum does not move at all, even at slow wash speed. On a belt-driven machine the belt has almost always come off or snapped, and the giveaway is that the motor can be heard running with nothing happening. On a direct-drive machine there is no belt, so the fault is the motor or its control.
Can I fix a washing machine drum not turning myself?
Turn the empty drum by hand — very free movement suggests a belt, stiffness or grinding suggests bearings. Listen during a cycle for a motor running with no drum movement. Check nothing is jammed at the drum edge. Beyond those checks this one normally needs an engineer.
How much does it cost to repair a washing machine drum not turning?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open
- washing machine will not turn on
- washing machine tripping the electrics