What is actually happening
A spin needs three things to be true: the water is gone, the door is locked, and the load is balanced. If any one of them fails the machine skips the spin rather than risk it. Where the wash itself is fine and only the spin fails, the two usual culprits are worn motor carbon brushes on older belt-driven machines, or a load that the machine cannot balance.
The Indesit fault codes that point at this
A Indesit washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to not spinning:
- F01 — The machine has spotted an electrical fault in the part of the main control board that drives the motor, so it has shut the cycle down.
- F02 — The machine has stopped because it can't drive the drum properly — the motor, or the board controlling it, isn't behaving as expected.
- F09 — The washing machine's control board has lost or corrupted the software settings it needs, so it can't offer you a programme to start.
- F11 — The machine can't see the drain pump electrically at all, so it stops with a drum full of water.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a Indesit washing machine
- Worn carbon brushes on the motor — typical life is seven to ten years, and the machine will often wash but not spin
- Water left in the drum from a drain fault, so the spin is never attempted
- An unbalanced load — one heavy item such as a towel or duvet on its own
- A snapped or slipping drive belt: the motor runs, the drum does not
- A failed door interlock, so the machine will not commit to a high-speed spin
What you can safely check yourself
- Redistribute the load by hand and run a spin-only cycle — a single heavy item is a common and harmless cause
- Check whether water is left in the drum; if it is, this is a drain fault first and a spin fault second
- Listen during the attempted spin: a motor that revs while the drum stays still points at the belt
Still not spinning?
Most of these need an engineer once the checks above are done. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on Indesit machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my Indesit washing machine not spinning?
The machine washes normally but the clothes come out soaked, because the drum never reaches spin speed. A spin needs three things to be true: the water is gone, the door is locked, and the load is balanced. If any one of them fails the machine skips the spin rather than risk it. Where the wash itself is fine and only the spin fails, the two usual culprits are worn motor carbon brushes on older belt-driven machines, or a load that the machine cannot balance.
Can I fix a Indesit washing machine not spinning myself?
Redistribute the load by hand and run a spin-only cycle — a single heavy item is a common and harmless cause. Check whether water is left in the drum; if it is, this is a drain fault first and a spin fault second. Listen during the attempted spin: a motor that revs while the drum stays still points at the belt. Beyond those checks this one normally needs an engineer.
What Indesit error codes mean not spinning?
Indesit washing machines report this through their own fault codes. The ones that point at not spinning are F01, F02, F09, F11. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a Indesit washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other Indesit washing machine faults
- washing machine not draining
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open
- washing machine will not turn on
