0115 648 0929 Make A Service Enquiry

Samsung washing machine tripping the electrics

Switching the machine on, or reaching a certain point in the cycle, takes out the power to the house.

0115 648 0929
Same-day or 24-hour appointments
Repairs for all major brands
Local technicians with 50 years' expertise

What is actually happening

An RCD trips when current leaks to earth. When a machine trips it the moment it is switched on, the leak is usually in the mains filter or the wiring. When it only trips once the wash warms up, it is nearly always the heating element, which has cracked and is leaking to earth as soon as it energises — the timing is the diagnosis.

The Samsung fault codes that point at this

A Samsung washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to tripping the electrics:

If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.

The usual causes on a Samsung washing machine

What you can safely check yourself

  1. Note exactly when it trips — at switch-on, at fill, or once the water heats. That timing tells an engineer most of what they need
  2. Try a cold wash: if a 30°C cycle completes and a 60°C one trips, it is the element
  3. Leave the machine unplugged if it trips the house repeatedly — this one is not worth living with

Still tripping the electrics?

Most of these need an engineer once the checks above are done. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our engineers work on Samsung machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.

Call 0115 648 0929 Book online — postcode and number is all we need

Common questions

Why is my Samsung washing machine tripping the electrics?

Switching the machine on, or reaching a certain point in the cycle, takes out the power to the house. An RCD trips when current leaks to earth. When a machine trips it the moment it is switched on, the leak is usually in the mains filter or the wiring. When it only trips once the wash warms up, it is nearly always the heating element, which has cracked and is leaking to earth as soon as it energises — the timing is the diagnosis.

Can I fix a Samsung washing machine tripping the electrics myself?

Note exactly when it trips — at switch-on, at fill, or once the water heats. That timing tells an engineer most of what they need. Try a cold wash: if a 30°C cycle completes and a 60°C one trips, it is the element. Leave the machine unplugged if it trips the house repeatedly — this one is not worth living with. Beyond those checks this one normally needs an engineer.

What Samsung error codes mean tripping the electrics?

Samsung washing machines report this through their own fault codes. The ones that point at tripping the electrics are E05, H01, HE, TE. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.

How much does a Samsung washing machine repair cost?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Other Samsung washing machine faults

Repairs we cover near you

Need it looked at properly?

Call us today for fast, reliable appliance repairs from local experts.

0115 648 0929
Call 0115 648 0929