What is actually happening
Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
The Sharp fault codes that point at this
A Sharp washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to beeping or bleeping:
- E01 — The machine can't confirm the door is shut and locked, so it won't start the wash.
- E02 — The machine isn't getting enough water in the time it expects, so it has stopped and shown E02.
- E03 — The machine has tried to pump the water out and hasn't got the result it expected, so it stops with the drum still holding water.
- E04 — The machine has found more water in the drum than it should have, so it has stopped the wash and is pumping the excess out to avoid a flood.
- E05 — The machine can't read the water temperature properly, or the water isn't heating, so it stops rather than carry on.
- E06 — The machine has lost proper control or feedback from its drum motor, so it has stopped rather than risk running blind.
- E08 — The machine has spotted a fault in the electronics that control the drum motor, so it has stopped the wash.
- E09 — The machine has decided the electricity reaching it is outside the range it will run on, so it has stopped rather than carry on.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a Sharp washing machine
- A drain fault — the most common reason a machine stops and bleeps
- A door lock fault, where the machine cannot confirm the door is shut
- A fill or water-level fault
- A heating or sensor fault reported as a code
What you can safely check yourself
- Write down the code shown, or the pattern of flashing lights, before you switch it off
- Check whether there is water left in the drum — that points straight at draining
- Look up the code on our error-code pages, which cover 708 codes across 24 makes
Still beeping or bleeping?
If the checks above have not sorted it, it needs looking at properly. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on Sharp machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my Sharp washing machine beeping or bleeping?
The machine is bleeping repeatedly, usually with a light flashing, and has stopped mid-cycle. Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
Can I fix a Sharp washing machine beeping or bleeping myself?
Write down the code shown, or the pattern of flashing lights, before you switch it off. Check whether there is water left in the drum — that points straight at draining. Look up the code on our error-code pages, which cover 708 codes across 24 makes. Those checks fix it more often than not.
What Sharp error codes mean beeping or bleeping?
Sharp washing machines report this through their own fault codes. The ones that point at beeping or bleeping are E01, E02, E03, E04, E05, E06. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a Sharp washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other Sharp washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open