What F01 actually means
The dishwasher has decided there is too much water inside it and has shut down to stop it overflowing onto your floor.
Rangemaster's own instructions for this code are blunt: F01 (shown as F1 on the display) means there is a risk of water overflow, and you should turn the water tap off and get the machine looked at. The dishwasher monitors its water level, and when it sees a full level that it cannot clear \u2014 or water where there shouldn't be any \u2014 it locks out and runs the drain pump rather than carrying on. The fault also links the same display to a drain timeout, where the machine has pumped for a long spell and the level still reads full.
What F01 looks like on a Rangemaster dishwasher
Most people find this page having searched for what the machine is doing rather than the code itself. On a Rangemaster dishwasher, F01 usually shows up as one or more of these:
- Dishwasher not draining
- Water left in the tub at the end of the cycle
- Stops mid-cycle full of water
- Standing water in the bottom
- Not filling with water
- No water going in
- Takes for ever to fill
- Stops right at the start of the cycle
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- Water not draining away, so the level never drops \u2014 blocked filter, blocked or kinked drain hose, or a blocked sink spigot
- A leak inside the machine reaching the base tray, which trips the overflow protection
- The water inlet valve letting water in when it should be shut off
- A faulty pressure/level sensor telling the control board the tub is full when it isn't
- Drain pump worn or jammed by debris such as glass, labels or fruit stones
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Turn the water tap off at the wall \u2014 this is what Rangemaster tell you to do first, and it stops any further water entering
- Switch the dishwasher off at the socket for a minute, then back on, to see if the lockout clears
- Lift out and rinse the filter assembly in the bottom of the tub, clearing any food debris, glass or paper labels
- Check the drain hose behind the machine is not kinked, crushed against the wall or pushed too far into the standpipe
- If the machine drains into a sink waste, check the spigot has been unblanked and the waste itself isn't blocked
- Mop out any standing water in the bottom of the tub with a cloth before retrying
Which Rangemaster models show F01
F01 means the same thing on all 3 of these models. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.
RDW1045FI · RDW1260FI · RDW6012D22
Common questions about Rangemaster F01
What does F01 mean on a Rangemaster dishwasher?
The dishwasher has decided there is too much water inside it and has shut down to stop it overflowing onto your floor. Rangemaster's own instructions for this code are blunt: F01 (shown as F1 on the display) means there is a risk of water overflow, and you should turn the water tap off and get the machine looked at. The dishwasher monitors its water level, and when it sees a full level that it cannot clear \u2014 or water where there shouldn't be any \u2014 it locks out and runs the drain pump rather than carrying on. The fault also links the same display to a drain timeout, where the machine has pumped for a long spell and the level still reads full.
Can I fix Rangemaster F01 myself?
There are 6 checks you can safely do yourself first.
- Turn the water tap off at the wall \u2014 this is what Rangemaster tell you to do first, and it stops any further water entering.
- Switch the dishwasher off at the socket for a minute, then back on, to see if the lockout clears.
- Lift out and rinse the filter assembly in the bottom of the tub, clearing any food debris, glass or paper labels.
- Check the drain hose behind the machine is not kinked, crushed against the wall or pushed too far into the standpipe.
- If the machine drains into a sink waste, check the spigot has been unblanked and the waste itself isn't blocked.
- Mop out any standing water in the bottom of the tub with a cloth before retrying.
This one usually needs an engineer once you have tried them.
How much does it cost to repair Rangemaster F01?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing F01?
This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most dishwasher faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Rangemaster dishwasher codes
- Rangemaster F02 — The dishwasher can't get the dirty water out, so it has halt…
- Rangemaster F03 — The dishwasher has decided water is still coming in when it …
- Rangemaster F04 — The dishwasher isn't seeing water flowing in when it tries t…
- Rangemaster F05 — The dishwasher isn't getting enough water in, so it has halt…
- Rangemaster F06 — The dishwasher has shut the cycle down because the water tem…
- Rangemaster F07 — The dishwasher has stopped because the water isn't heating t…
- Rangemaster F08 — The dishwasher's control board has lost or corrupted the set…
- Rangemaster F09 — The dishwasher has lost a reliable signal from one of its wa…
All Rangemaster fault codes and repairs →
