What E94 actually means
The dryer's control board has lost or mangled the settings that tell it how to run a drying cycle, so it abandons the programme.
Inside the main electronic board is a small memory chip (the EEPROM) holding the configuration for your particular model — which cycles it offers and how they should run. When the board reads that data back and finds it doesn't match what it expects, it stops the cycle rather than run a programme it can't trust. The fault puts this down to incorrect EEPROM configuration or a failed main board.
What E94 looks like on a AEG tumble dryer
Most people find this page having searched for what the machine is doing rather than the code itself. On a AEG tumble dryer, E94 usually shows up as one or more of these:
- No function at all
- Dead — nothing lights up
- Lights flashing and nothing happening
- Programme won't start
- Machine tripping the electrics
- E94 flashing on the display
- Beeping and showing E94
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- Corrupted configuration data stored in the control board's memory
- A failed main electronic board
- A replacement board fitted without being configured to the model
- Electrical disturbance or a mains interruption scrambling the stored settings
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Turn the dryer off at the wall for a minute, then back on and try a cycle — an occasional one-off glitch will clear
- If the machine has recently had a control board replaced, mention that to whoever attends, as the board may not have been configured for your model
Common questions about AEG E94
What does E94 mean on a AEG tumble dryer?
The dryer's control board has lost or mangled the settings that tell it how to run a drying cycle, so it abandons the programme. Inside the main electronic board is a small memory chip (the EEPROM) holding the configuration for your particular model — which cycles it offers and how they should run. When the board reads that data back and finds it doesn't match what it expects, it stops the cycle rather than run a programme it can't trust. The fault puts this down to incorrect EEPROM configuration or a failed main board.
Can I fix AEG E94 myself?
There are 2 checks you can safely do yourself first.
- Turn the dryer off at the wall for a minute, then back on and try a cycle — an occasional one-off glitch will clear.
- If the machine has recently had a control board replaced, mention that to whoever attends, as the board may not have been configured for your model.
This one usually needs an engineer once you have tried them.
How much does it cost to repair AEG E94?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing E94?
This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most tumble dryer faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other AEG tumble dryer codes
- AEG E97 — The dryer's control board has lost track of which programme …
- AEG E22 — The dryer's control board can no longer monitor the pump tha…
- AEG E31 — The dryer's moisture-sensing circuit is giving a reading tha…
- AEG E32 — The dryer's damp-sensing circuit is reading a signal that's …
- AEG E45 — The dryer can't confirm the door is properly shut, so it won…
- AEG E50 — The dryer has flagged a problem with the drum motor or its c…
- AEG E51 — The dryer has shut the cycle down because the electronic swi…
- AEG E52 — The safety cut-out built into the drum motor has got too hot…
All AEG fault codes and repairs →