Zanussi E67 tumble dryer: what it means & what to check

Stop using it for now. Carrying on with this fault risks further damage or a leak. Switch it off at the wall until it has been looked at.

What E67 actually means

The dryer's control board has lost proper control of the switch that drives the fan motor, so it has shut the cycle down rather than run the heater with no reliable airflow.

Inside the ENV06-type control board there's a solid-state switch (a triac) that turns the fan motor on and off. On E67 the board can see that this switching circuit isn't behaving as it should — either the fan motor circuit isn't connected properly or the CRM control board itself has failed. Because a dryer that heats without moving air is a genuine overheating risk, the machine stops instead of carrying on.

What E67 looks like on a Zanussi tumble dryer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Zanussi tumble dryer, E67 usually shows up as one or more of these:

Machine door won't open
Door won't lock or click shut
Door lock light flashing
Door stuck shut with the load inside
Won't start even with the door closed
Not drying
Blowing cold air
Clothes still damp at the end

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Loose or disconnected fan motor wiring at the board
Failed triac on the CRM control board
Damaged or chafed wiring in the fan motor loom
Fan motor fault dragging the drive circuit down

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Turn the dryer off at the wall for a minute, then power it back up and start a cycle — occasionally the board clears a one-off glitch
Clean the door filter and, on condenser models, the condenser filter, and make sure the machine isn't jammed tight against a wall restricting airflow
Note whether you can hear the fan running at all before the code appears — that's genuinely useful information for the engineer

Common questions about Zanussi E67

What does E67 mean on a Zanussi tumble dryer?

The dryer's control board has lost proper control of the switch that drives the fan motor, so it has shut the cycle down rather than run the heater with no reliable airflow. Inside the ENV06-type control board there's a solid-state switch (a triac) that turns the fan motor on and off. On E67 the board can see that this switching circuit isn't behaving as it should — either the fan motor circuit isn't connected properly or the CRM control board itself has failed. Because a dryer that heats without moving air is a genuine overheating risk, the machine stops instead of carrying on.

Can I fix Zanussi E67 myself?

There are 3 checks you can safely do yourself first.

Turn the dryer off at the wall for a minute, then power it back up and start a cycle — occasionally the board clears a one-off glitch.
Clean the door filter and, on condenser models, the condenser filter, and make sure the machine isn't jammed tight against a wall restricting airflow.
Note whether you can hear the fan running at all before the code appears — that's genuinely useful information for the engineer.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Zanussi E67?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E67?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most tumble dryer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Zanussi tumble dryer codes

All Zanussi fault codes and repairs →

What this looks like when it happens

Repairs we cover near you

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Zanussi E67 error — tumble dryer