What E94 actually means
The dryer's control board has lost or corrupted the settings that tell it how to run the drying programme, so it has abandoned the cycle.
Every Zanussi dryer control board carries stored configuration data (held in an EEPROM) covering how each drying cycle should behave. E94 means the board has read that data for the selected cycle and found it wrong or unreadable, so rather than run a programme it cannot define, it interrupts the cycle. It is closely related to E93, which flags a configuration fault for the appliance as a whole rather than the drying cycle specifically.
What E94 looks like on a Zanussi tumble dryer
Most people find this page having searched for what the machine is doing rather than the code itself. On a Zanussi tumble dryer, E94 usually shows up as one or more of these:
- No function at all
- Dead — nothing lights up
- Lights flashing and nothing happening
- Programme won't start
- Machine tripping the electrics
- E94 flashing on the display
- Beeping and showing E94
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- Corrupted configuration data stored in the control board's memory
- A control board that has failed internally
- A replacement board fitted without being configured for the model
- Electrical interference or a power interruption that scrambled the stored settings
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Turn the dryer off at the wall socket, leave it a minute, then switch back on and try the cycle again — an occasional one-off glitch will clear this way
- Try a different programme; if only one cycle throws the fault it is worth mentioning to the engineer
Common questions about Zanussi E94
What does E94 mean on a Zanussi tumble dryer?
The dryer's control board has lost or corrupted the settings that tell it how to run the drying programme, so it has abandoned the cycle. Every Zanussi dryer control board carries stored configuration data (held in an EEPROM) covering how each drying cycle should behave. E94 means the board has read that data for the selected cycle and found it wrong or unreadable, so rather than run a programme it cannot define, it interrupts the cycle. It is closely related to E93, which flags a configuration fault for the appliance as a whole rather than the drying cycle specifically.
Can I fix Zanussi E94 myself?
There are 2 checks you can safely do yourself first.
- Turn the dryer off at the wall socket, leave it a minute, then switch back on and try the cycle again — an occasional one-off glitch will clear this way.
- Try a different programme; if only one cycle throws the fault it is worth mentioning to the engineer.
This one usually needs an engineer once you have tried them.
How much does it cost to repair Zanussi E94?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing E94?
This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most tumble dryer faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Zanussi tumble dryer codes
- Zanussi E97 — The dryer's control board and the programme selector don't a…
- Zanussi E22 — The dryer's control board has lost confidence in the circuit…
- Zanussi E31 — The dryer's moisture-sensing circuit is giving a reading tha…
- Zanussi E32 — The dryer's moisture sensor is reading almost nothing, so th…
- Zanussi E45 — The dryer can't confirm the door is properly shut, so it has…
- Zanussi E51 — The dryer has shut the cycle down because the switch on the …
- Zanussi E52 — The dryer's motor has got too hot and its built-in safety cu…
- Zanussi E53 — The dryer's control board has lost track of the drum motor's…
All Zanussi fault codes and repairs →