What is actually happening
Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
The Indesit fault codes that point at this
A Indesit washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to beeping or bleeping:
- F01 — The machine has spotted an electrical fault in the part of the main control board that drives the motor, so it has shut the cycle down.
- F02 — The machine has stopped because it can't drive the drum properly — the motor, or the board controlling it, isn't behaving as expected.
- F06 — The machine can't confirm the door is locked, so it won't start the wash \u2014 or it won't release the door at the end.
- F07 — The control board has spotted a problem on the heating side of the circuit, so the machine stops mid-wash rather than carrying on cold.
- F08 — The machine has a problem with the water heating side of things he switon the control board that switches it on \u2014 so it won't heat and usually stops partway through the wash.
- F09 — The washing machine's control board has lost or corrupted the software settings it needs, so it can't offer you a programme to start.
- F11 — The machine can't see the drain pump electrically at all, so it stops with a drum full of water.
- F12 — The machine's control board and its display/selector unit have stopped talking to each other, so the washer won't start or respond properly.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a Indesit washing machine
- A drain fault — the most common reason a machine stops and bleeps
- A door lock fault, where the machine cannot confirm the door is shut
- A fill or water-level fault
- A heating or sensor fault reported as a code
What you can safely check yourself
- Write down the code shown, or the pattern of flashing lights, before you switch it off
- Check whether there is water left in the drum — that points straight at draining
- Look up the code on our error-code pages, which cover 708 codes across 24 makes
Still beeping or bleeping?
If the checks above have not sorted it, it needs looking at properly. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on Indesit machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my Indesit washing machine beeping or bleeping?
The machine is bleeping repeatedly, usually with a light flashing, and has stopped mid-cycle. Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
Can I fix a Indesit washing machine beeping or bleeping myself?
Write down the code shown, or the pattern of flashing lights, before you switch it off. Check whether there is water left in the drum — that points straight at draining. Look up the code on our error-code pages, which cover 708 codes across 24 makes. Those checks fix it more often than not.
What Indesit error codes mean beeping or bleeping?
Indesit washing machines report this through their own fault codes. The ones that point at beeping or bleeping are F01, F02, F06, F07, F08, F09. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a Indesit washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other Indesit washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open