What is actually happening
An integrated dishwasher door carries the weight of a cupboard door on its hinges and springs, and those take a lot of use. When a hinge spring or cable breaks the door drops slightly, stops meeting the catch square, and will not latch — which the machine reads as an open door and refuses to run.
The New World fault codes that point at this
A New World dishwasher will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to door will not close:
- F01 — The dishwasher has tried to pump the water out, given it three minutes and the water level hasn't dropped, so it has stopped and flagged a drain fault.
- F04 — The dishwasher can't get a reliable reading of how much water it's taking in, so it stops rather than carry on blind.
- F05 — The dishwasher isn't getting enough water in, so it has stopped rather than run a cycle dry.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a New World dishwasher
- A broken door hinge spring or cable on an integrated machine
- A misaligned or dropped cupboard door front
- A worn or broken door catch
- Racks or a tall item fouling the door as it closes
- The machine not sitting level in the housing
What you can safely check yourself
- Pull the racks out and check nothing is protruding to catch the door
- Watch the door as it closes — a door that falls the last few inches rather than closing smoothly has a broken spring
- Check the cupboard front is still square on its fixings
Still door will not close?
Most of these need an engineer once the checks above are done. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on New World machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my New World dishwasher door will not close?
The door will not latch shut, so no cycle can be started. An integrated dishwasher door carries the weight of a cupboard door on its hinges and springs, and those take a lot of use. When a hinge spring or cable breaks the door drops slightly, stops meeting the catch square, and will not latch — which the machine reads as an open door and refuses to run.
Can I fix a New World dishwasher door will not close myself?
Pull the racks out and check nothing is protruding to catch the door. Watch the door as it closes — a door that falls the last few inches rather than closing smoothly has a broken spring. Check the cupboard front is still square on its fixings. Beyond those checks this one normally needs an engineer.
What New World error codes mean door will not close?
New World dishwashers report this through their own fault codes. The ones that point at door will not close are F01, F04, F05. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a New World dishwasher repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other New World dishwasher faults
- dishwasher not draining
- dishwasher will not switch on
- dishwasher not cleaning the dishes
- dishwasher not drying the dishes
- dishwasher leaking
- dishwasher not heating the water