What E03 actually means
The appliance has stopped because two of its internal control boards have lost contact with each other, so the touch controls and the heating side are no longer talking.
The codes we cover for this code cover Beko's induction hob control system, where E3 is reported as a communication failure between the touch-control board behind the glass and the main power board. The unit shuts the heating down because it can no longer confirm what the controls are asking for. We cannot confirm from the material available that the same code carries this meaning on an oven, so treat the above with caution.
What E03 looks like on a Beko oven
Most people find this page having searched for what the machine is doing rather than the code itself. On a Beko oven, E03 usually shows up as one or more of these:
- Not heating up
- Takes ages to get to temperature
- Cuts out part way through cooking
- Noisy fan
- Not getting cold evenly
- Cuts out after a few minutes
- No function at all
- Dead — nothing lights up
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- A loose or partly unseated connector between the two control boards
- A damaged or chafed ribbon cable or wiring loom between them
- A failed touch-control board behind the glass or fascia
- A failed main control board
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Turn the appliance off at the wall or at its isolating switch, leave it for a minute, then switch back on — a one-off communication glitch will sometimes clear
- Make sure the control surface is clean and completely dry, and that nothing is resting on or against the controls
Which Beko models show E03
E03 means the same thing on all 10 of these models. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.
7756286314 · 7757182921 · 7757186303 · 7757186304 · 7757186309 · 7757187603 · 7757187655 · 7757188613 · 7757188616 · 7757188617
Common questions about Beko E03
What does E03 mean on a Beko oven?
The appliance has stopped because two of its internal control boards have lost contact with each other, so the touch controls and the heating side are no longer talking. The codes we cover for this code cover Beko's induction hob control system, where E3 is reported as a communication failure between the touch-control board behind the glass and the main power board. The unit shuts the heating down because it can no longer confirm what the controls are asking for. We cannot confirm from the material available that the same code carries this meaning on an oven, so treat the above with caution.
Can I fix Beko E03 myself?
There are 2 checks you can safely do yourself first.
- Turn the appliance off at the wall or at its isolating switch, leave it for a minute, then switch back on — a one-off communication glitch will sometimes clear.
- Make sure the control surface is clean and completely dry, and that nothing is resting on or against the controls.
This one usually needs an engineer once you have tried them.
How much does it cost to repair Beko E03?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing E03?
This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most oven faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Beko oven codes
- Beko E04 — The control board has lost a sensible reading from the tempe…
- Beko E07 — The control board has lost the mains signal it uses to work …
- Beko F00 — The oven's touch control panel has thrown a fault \u2014 in …
- Beko F02 — The touch controls failed the self-check they run every time…
- Beko E02 — The appliance has lost a sensible reading from one of its te…
All Beko fault codes and repairs →