Out-of-warranty Beko repairs, done locally
If your Beko appliance is still under the manufacturer's warranty, go to Beko first — you should not be paying for that repair. Once it is out of warranty, you do not have to use them, and you will usually wait less and pay less if you do not.
We are a local firm with over 50 years in the trade, covering Nottinghamshire, Derbyshire and Leicestershire. The engineer who comes out is one of ours, not a subcontractor from a national call centre.
What it costs
£66 including VAT for an engineer to come out and diagnose the fault — that is the visit and the diagnosis, with nothing added on top. If it is repaired on the visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide.
Nothing is taken when you book, and every repair carries a 90-day workmanship guarantee — if our work is at fault in that time we come back and put it right at no charge.
What we hold for Beko
We keep Beko service documentation in-house, covering 1,860 Beko models across 39,813 documents. For Beko that includes manufacturer parts lists, exploded views and wiring diagrams, the manufacturer’s own fault-finding procedures and service manuals and technical bulletins.
It matters more than it sounds. It means the engineer arrives knowing how your machine comes apart, which part number fits your model rather than one that looks similar, and what the manufacturer says the fault actually is — instead of working it out on your kitchen floor at your expense. Most firms are reading the same user manual you have in the drawer.
Beko error codes, explained
These are what the codes actually mean rather than a guess. Worth a read before you call anyone — some of them you can clear yourself in five minutes.
Tumble dryer
- Beko 7E — On this dryer, 7E isn't a fault at all \you you it's a 7kg Eco heat pu…
- Beko E00 — On Beko tumble dryers, E00 isn't a fault at all \u9000 it's the code t…
- Beko E01 — The dryer has detected the door coming open part way through the cycle…
- Beko E02 — The dryer thinks its water tank is full and has stopped drying until i…
- Beko E03 — The dryer thinks there's nothing in the drum, so it has stopped instea…
- Beko E04 — The dryer has been asked to start while the door is not properly shut,…
- Beko E17 — The dryer has measured the mains supply coming into it as too high — a…
- Beko E18 — The dryer's control board has lost communication with the drum motor's…
- Beko E19 — The dryer's motor control has halted the drum motor and stopped the pr…
- Beko E34 — The sensor in the condenser area is reading a temperature that's too h…
Washing machine
- Beko C01 — C01 isn't a fault oown as you hold the buttons to switch the child loc…
- Beko C02 — C02 isn't a fault \u2014 it's the middle of a three-second countdown w…
- Beko C03 — C03 isn't a fault at all — it's the first digit of a three-second coun…
- Beko C04 — The drum has not been able to spin properly because the load inside is…
- Beko C07 — The machine's control boards have stopped talking to each other proper…
- Beko E00 — On a Beko washing machine E00 isn't a fault at all — it means the dela…
- Beko E01 — The machine can't get a sensible reading from the sensor that measures…
- Beko E02 — The machine can't heat the water — the heating element or its wiring h…
- Beko E03 — The machine has spotted that its water heater is staying on when it sh…
- Beko E04 — The machine has spotted a fault in the electronics that switch the wat…
- Beko E05 — The machine can't pump the water out — the drain pump isn't working or…
- Beko E06 — The control board has spotted a fault in the part that drives the drum…
- Beko E07 — The machine can't get a sensible reading from the part that tells it h…
- Beko E08 — The machine isn't getting enough water in, so it has stopped the cycle…
- Beko E09 — The machine can't lock the door properly, so it won't start the wash.
- Beko E10 — The machine has spotted a fault in the part of its control board that …
- Beko E11 — The machine has lost the electrical connection to one of the motor win…
- Beko E12 — The machine thinks it has too much water in it, so it has shut the was…
- Beko E13 — The machine's main control board has lost contact with the motor's own…
- Beko E14 — The machine has spotted an electrical fault in the circuit that drives…
- Beko E15 — The machine can't get a proper reading from the sensor that measures h…
- Beko E16 — The machine has lost the signal from the sensor that judges how clean …
- Beko E17 — The machine has detected too much foam in the drum and has ended the p…
- Beko E18 — The washing machine couldn't balance the load in the drum, so it ended…
- Beko E20 — The machine has found a fault in the circuit that locks and releases t…
- Beko E21 — There is more water in the drum than the machine can safely pump out, …
- Beko E22 — The machine couldn't balance the wash load, so it ended the programme …
- Beko E23 — The machine can't get a reliable signal from the door switch, so it wo…
- Beko E24 — The machine can't get a reading from the sensor that works out how muc…
- Beko E25 — The control panel and the main circuit board inside the machine have s…
- Beko E26 — The washing machine's main control board can't read or write its own m…
- Beko E27 — The machine has spotted water where it shouldn't be — either a leak in…
- Beko E28 — The machine can't confirm the door has locked, so it won't start the w…
- Beko E29 — The machine has stopped because the electricity reaching it is either …
- Beko E30 — The machine has lost a sensible reading from one of its temperature se…
- Beko E31 — The machine has lost a sensible reading from one of the temperature se…
- Beko E32 — The machine can't get a sensible reading from the temperature sensor i…
- Beko E35 — The heating element that warms the air for drying has gone open circui…
- Beko E36 — The machine thinks the drum is empty, so it has cancelled the drying p…
- Beko E37 — The machine has measured too high a temperature at the drum air inlet …
- Beko E38 — On your Beko washer-dryer, the drying side has got too hot and the mac…
- Beko E39 — The washer-dryer has found the air coming out of the condenser is far …
- Beko E40 — The drying side of your washer-dryer isn't getting enough air through …
- Beko E41 — The fan that moves hot air through the drum during drying isn't shifti…
- Beko E42 — The cooling fan in the drying section isn't moving enough air, so the …
- Beko E43 — The drying side of your washer dryer is getting too hot, so the machin…
- Beko E44 — On a Beko washer-dryer, this points at the small water valve that rins…
- Beko E45 — The machine's control board has lost, or never received, the settings …
- Beko E70 — The machine has lost a sensible signal from the sensor that monitors i…
- Beko E71 — The machine can't get a signal from the sensor that tracks the AquaTec…
- Beko E72 — The machine has shut the cycle down after its control board flagged an…
- Beko E73 — The control board has lost its electrical connection to the drum motor…
- Beko E80 — The machine's main circuit board has a fault in the part that controls…
- Beko E81 — The washing machine's main control board has faulted on the part of th…
- Beko E82 — The machine's main control board has a fault in the part of it that sw…
- Beko E84 — The machine's Wi-Fi/Bluetooth side isn't talking to the rest of the ap…
- Beko E87 — The machine has flagged a problem with its microfibre filter system in…
- Beko E89 — The main control board has failed in the part that powers the door loc…
- Beko F00 — The machine thinks the lid isn't properly shut, so it has stopped rath…
- Beko F01 — The machine can't get a sensible reading from its water temperature se…
- Beko F02 — The machine has spotted a fault in the water-heating side of things — …
- Beko F03 — Your Beko has spotted a fault in the water heating circuit and has shu…
- Beko F04 — The machine has spotted that the water heater is being switched on whe…
- Beko F05 — The machine has a problem with its drain pump \u2014 it can't empty th…
- Beko F06 — The control board has found a fault in the part of its circuitry that …
- Beko F07 — The machine can't tell how much water is in the drum, so it refuses to…
- Beko F08 — The machine has spotted a fault in the electronics that switch the dra…
- Beko F09 — The machine can't operate the door lock properly, so it stops rather t…
- Beko F10 — The main control board has a fault in the circuit that powers the door…
- Beko F11 — The machine has filled with water but the drum will not turn, so it ha…
- Beko F13 — The main control board has lost communication with the motor's own con…
- Beko H01 — The machine can no longer read the water temperature, so it has stoppe…
- Beko H02 — The heating element has gone open circuit he element circuit is broken…
- Beko H05 — The machine has spotted water continuing to come in when it shouldn't …
- Beko H06 — The machine hasn't taken in the water it expected, so it has halted th…
- Beko H07 — The machine can't tell how much water is in the drum, so it stops rath…
Fridge freezer
- Beko E00 — The control board has lost a sensible reading from the freezer's tempe…
- Beko E01 — The sensor that tells the fridge freezer how cold its freezer cooling …
- Beko E02 — The temperature sensor on the fridge side's cooling coil (evaporator) …
- Beko E03 — The sensor that measures the air temperature inside the fridge (fresh …
- Beko E04 — The freezer's automatic defrost heater hasn't done its job, so the mac…
- Beko E05 — The fridge freezer has lost a reliable reading from the sensor that me…
- Beko E06 — The motorised flap that lets cold air from the freezer side into the f…
- Beko E08 — The temperature sensor inside the ice maker section has stopped report…
- Beko E09 — The motor that turns the ice maker's tray to drop ice cubes isn't repo…
- Beko E10 — The temperature sensor in the convertible "multi-zone" compartment — t…
- Beko E11 — The control board has lost a sensible reading from the temperature sen…
- Beko E12 — The fridge freezer has decided its automatic defrost heating isn't wor…
- Beko E13 — The fan that circulates cold air around the freezer isn't reporting ba…
- Beko E14 — The fan that circulates cold air through the multi-zone ("Joker") comp…
- Beko E15 — The fan that cools the condenser at the back of the fridge has stopped…
- Beko E16 — The fan that circulates cold air around the fridge (fresh food) sectio…
- Beko E17 — The flap fan — the small fan that pushes cold air through the flap duc…
- Beko E18 — The fan that circulates cold air through the BioFresh (crisper/zero-zo…
- Beko E19 — The fridge has lost a sensible temperature reading from the sensor in …
- Beko E20 — The control board has lost a sensible reading from the temperature sen…
- Beko E21 — The fridge compartment has been too warm for too long, and the machine…
- Beko E22 — Your fridge freezer can't reach your home Wi-Fi network — it's a conne…
- Beko E23 — The fridge freezer can't get onto your home Wi-Fi ted attempt has been…
- Beko E24 — The fan that circulates cold air around the fridge section isn't repor…
- Beko E25 — The fridge has lost a sensible reading from the temperature sensor tha…
- Beko E26 — One of the UV sterilising lamps inside the fridge has failed, and the …
- Beko E27 — The appliance is telling you it lost mains power — it's a power outage…
- Beko E31 — The main control board has lost contact with the small sensor board th…
- Beko E42 — The temperature sensor for the soft-freeze compartment (the drawer tha…
- Beko E54 — The built-in ice maker hasn't got cold enough to release ice, and afte…
Washer dryer
- Beko E00 — E00 isn't a fault at all — it's the machine telling you its error memo…
- Beko E01 — The sensor that tells the machine how hot the water is has stopped giv…
- Beko E02 — The machine has lost the heating element circuit — the water heater is…
- Beko E03 — The machine has worked out that the water heater is staying switched o…
- Beko E04 — The machine has spotted that water is coming in when it shouldn't be —…
- Beko E05 — The machine can't drain — the drain pump either isn't turning or isn't…
- Beko E06 — The control board can no longer switch the drum motor properly, so the…
- Beko E07 — The machine can't get a sensible reading of how much water is in the d…
- Beko E08 — The machine has given up waiting for the water level to reach where it…
- Beko E09 — The machine cannot lock the door, so it refuses to start filling or ru…
- Beko E10 — The machine has found a fault in the circuit that powers the door lock…
- Beko E11 — The control board has lost proper feedback or drive to the drum motor,…
- Beko E12 — The machine has detected more water inside it than it should ever hold…
- Beko E13 — The main control board has lost proper communication with the motor's …
- Beko E14 — The machine has lost proper control of its jet (recirculation) pump — …
- Beko E15 — The machine has lost a sensible signal from the flowmeter — the small …
- Beko E16 — The sensor that measures how much detergent is left in the rinse water…
- Beko E17 — The machine has detected too much foam in the drum and has stepped in …
- Beko E18 — The washing has bunched up on one side of the drum, so the machine gav…
- Beko E22 — The control panel display has stopped talking to the machine's main bo…
- Beko E23 — The machine can't confirm the door is properly shut, so it won't start…
- Beko E24 — The machine can't get a reading from the sensor that works out how muc…
- Beko E25 — The control panel and the main circuit board inside the machine have s…
- Beko E26 — The washer dryer's main control board can't read or write its own stor…
- Beko E27 — The machine has worked out that water is going somewhere it shouldn't …
- Beko E28 — The machine isn't getting confirmation that the door has locked, so it…
- Beko E29 — The machine has decided the electricity reaching it isn't right — the …
- Beko E30 — The machine has lost a sensible reading from the temperature sensor at…
- Beko E31 — The machine has lost a sensible reading from one of the temperature se…
- Beko E32 — The temperature sensor at the door bellow/gasket inlet is giving a rea…
- Beko E35 — The heating element that warms the air for drying has gone open circui…
- Beko E36 — The machine thinks the drum is empty, so it has abandoned the drying p…
- Beko E37 — The machine has decided the drum is getting too hot during drying and …
- Beko E38 — The machine has spotted the air going into the condenser getting too h…
- Beko E39 — The washer dryer has measured too high a temperature in the drying air…
- Beko E40 — The machine has decided the drying fan isn't moving enough air, so it …
- Beko E41 — The fan that moves hot air through the drum during drying has stopped …
- Beko E42 — The machine has stopped the drying cycle because the cooling fan that …
- Beko E43 — The machine has detected that the drying side is getting too hot and h…
- Beko E44 — The dryer side of the machine can't rinse out its condenser with water…
- Beko E45 — The dryer side of the machine has failed a safety check — it could not…
Hob
- Beko E01 — The hob has lost a sensible temperature reading from one of its cookin…
- Beko E02 — The hob's electronics have lost a sensible reading from one of the tem…
- Beko E04 — The hob's control board is reading a temperature sensor that never cha…
- Beko F01 — The touch control panel on the hob has failed its own self-test, so th…
- Beko F02 — The hob has detected a problem with the touch controls on its glass to…
- Beko F03 — The hob's touch control panel has lost communication with the rest of …
Oven
- Beko E02 — The appliance has lost a sensible reading from one of its temperature …
- Beko E03 — The appliance has stopped because two of its internal control boards h…
- Beko E04 — The control board has lost a sensible reading from the temperature sen…
- Beko E07 — The control board has lost the mains signal it uses to work out whethe…
- Beko F00 — The oven's touch control panel has thrown a fault \u2014 in most cases…
- Beko F02 — The touch controls failed the self-check they run every time the appli…
Dishwasher
- Beko H02 — The dishwasher can no longer get a sensible reading from the sensor th…
- Beko H03 — The dishwasher has lost track of the three-way valve that switches wat…
- Beko H04 — The dishwasher can no longer read the water temperature, so it has sto…
- Beko H06 — The dishwasher isn't getting the water it expects, so it has halted ra…
- Beko H07 — The dishwasher has given up trying to heat the water and has stopped t…
Beko appliances we repair
- Washing Machine Repairs
- Fridge & Freezer Repairs
- Dishwasher Repairs
- Oven Repairs
- Cooker Repairs
- Tumble Dryer Repairs
- Freezer Repairs
- Washer Dryer Repairs
- Electric & Induction Hob Repairs
- Cooker Hood & Extractor Repairs
Common questions
My Beko is still under warranty — should I call you?
No. Go to Beko first, or to the retailer you bought it from. If it is in warranty that repair should not cost you anything, and we would only be charging you for something you can have free. Come to us once it is out of warranty — you are not obliged to use the manufacturer then, and you will usually wait less and pay less.
What does a Beko repair cost?
£66 including VAT for an engineer to come out and diagnose the fault. If it is fixed on that visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide. Nothing is taken when you book.
My Beko is showing an error code — what does it mean?
We have written up 174 Beko codes from the manufacturer's own service data, in plain English rather than a guess. They are linked further down this page. Some of them you can clear yourself in five minutes without paying anyone.
Can you get parts for a Beko?
Usually, yes. We hold the manufacturer's parts lists for 1,860 Beko models, so the part is ordered against your actual model number rather than something that looks close. Where a part is genuinely discontinued we will tell you that plainly rather than order it and hope.
Is it worth repairing a Beko appliance or should I replace it?
That depends on what is wrong and how old it is, and we will tell you straight. If the repair is going to cost more than the machine is worth, we say so — you have paid £66 to find that out, which is a good deal cheaper than replacing something that had five years left in it.
Do you cover my area?
We cover Nottinghamshire, Derbyshire and Leicestershire — the NG, DE and LE postcodes. Put your postcode into the form at the top of the page and it will tell you straight away.
How soon can someone come out?
Same day or next day in most of our area. Tell us what the appliance is doing using the form above and you will get a price and the slots we have left.
Getting someone out
Use the form at the top of the page for a price, call 0115 648 0929, or use the chat in the corner — it can check your postcode and book you in.
