Beko E36 washer dryer: what it means & what to check

What E36 actually means

The machine thinks the drum is empty, so it has abandoned the drying programme.

On this Beko washer dryer, the control board weighs the load before it commits to a drying cycle. If it can't detect any laundry in there, it flags E36, spins briefly and ends the programme rather than heating an empty drum. The usual owner experience is a drying cycle that starts, turns for a minute or two, then stops with the code showing.

What E36 looks like on a Beko washer dryer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Beko washer dryer, E36 usually shows up as one or more of these:

Machine door won't open
Door won't lock or click shut
Door lock light flashing
Door stuck shut with the load inside
Won't start even with the door closed
Machine not draining
Water left in the drum at the end of the cycle
Stops mid-cycle full of water

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Drying started with nothing in the drum
A very small load — one or two light items the machine can't register
Washing bunched to one side or stuck up under the drum baffles
The load sensing system misreading the drum weight
A fault in the load sensor or its wiring

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Open the door and check there is actually laundry inside — it sounds obvious, but this code is often exactly that
If you're drying only one or two light items, add a couple more and restart the drying programme
Shake the load out loose and spread it around the drum rather than leaving it in one clump
Turn the machine off at the wall for a minute, then power up and try the drying cycle again with a normal load in

Which Beko models show E36

E36 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

7138341200

Common questions about Beko E36

What does E36 mean on a Beko washer dryer?

The machine thinks the drum is empty, so it has abandoned the drying programme. On this Beko washer dryer, the control board weighs the load before it commits to a drying cycle. If it can't detect any laundry in there, it flags E36, spins briefly and ends the programme rather than heating an empty drum. The usual owner experience is a drying cycle that starts, turns for a minute or two, then stops with the code showing.

Can I fix Beko E36 myself?

There are 4 checks you can safely do yourself first.

Open the door and check there is actually laundry inside — it sounds obvious, but this code is often exactly that.
If you're drying only one or two light items, add a couple more and restart the drying programme.
Shake the load out loose and spread it around the drum rather than leaving it in one clump.
Turn the machine off at the wall for a minute, then power up and try the drying cycle again with a normal load in.

This sometimes clears with those checks. If it comes back, it needs looking at properly.

How much does it cost to repair Beko E36?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E36?

This sometimes clears with the checks above. If it comes back, it needs looking at properly. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Beko washer dryer codes

All Beko fault codes and repairs →

What this looks like when it happens

washer dryer not drying

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Beko E36 error — washer dryer