Beko E25 washer dryer: what it means & what to check

What E25 actually means

The control panel and the main circuit board inside the machine have stopped talking to each other, so the washer dryer won't take instructions.

Beko's driver (main) board and the display board are linked by a ribbon-type communication cable and a 5V supply. If that link drops out, the machine can't confirm what programme you've asked for, so it refuses to start, cuts a cycle short, or the panel goes dead with no lights and unresponsive buttons. It's a control fault rather than anything to do with water, heating or the drum.

What E25 looks like on a Beko washer dryer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Beko washer dryer, E25 usually shows up as one or more of these:

Not drying
Blowing cold air
Clothes still damp at the end
Takes hours to dry
No function at all
Dead — nothing lights up
Lights flashing and nothing happening
Programme won't start

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

The communication plug at either the display or the main board working loose
A damaged or broken wire in the display-to-main-board cable
Loss of the 5V supply from the power board to the main board
A failed display board
A failed main (driver) board

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Switch the machine off at the wall socket, leave it a minute, then power it back up — an occasional one-off glitch will clear
Try selecting a programme again from cold; note whether the panel lights up at all, as a completely dead display is useful information for the engineer

Which Beko models show E25

E25 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

7138341200

Common questions about Beko E25

What does E25 mean on a Beko washer dryer?

The control panel and the main circuit board inside the machine have stopped talking to each other, so the washer dryer won't take instructions. Beko's driver (main) board and the display board are linked by a ribbon-type communication cable and a 5V supply. If that link drops out, the machine can't confirm what programme you've asked for, so it refuses to start, cuts a cycle short, or the panel goes dead with no lights and unresponsive buttons. It's a control fault rather than anything to do with water, heating or the drum.

Can I fix Beko E25 myself?

There are 2 checks you can safely do yourself first.

Switch the machine off at the wall socket, leave it a minute, then power it back up — an occasional one-off glitch will clear.
Try selecting a programme again from cold; note whether the panel lights up at all, as a completely dead display is useful information for the engineer.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Beko E25?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E25?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Beko washer dryer codes

All Beko fault codes and repairs →

What this looks like when it happens

washer dryer not drying

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Beko E25 error — washer dryer