Beko E22 washer dryer: what it means & what to check

Stop using it for now. Carrying on with this fault risks further damage or a leak. Switch it off at the wall until it has been looked at.

What E22 actually means

The control panel display has stopped talking to the machine's main board, so the washer dryer won't run a programme.

E22 is an LCD communication failure — the display card and the main control board are no longer exchanging signals. The usual symptom is a blank or dead screen, or a display that lights up but the machine won't accept a programme. The machine stops because the control board can't confirm what has been selected or report back progress.

What E22 looks like on a Beko washer dryer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Beko washer dryer, E22 usually shows up as one or more of these:

Stops after a few minutes
Clothes still damp at the end
Finishes far too early
No function at all
Dead — nothing lights up
Lights flashing and nothing happening
Programme won't start
Machine tripping the electrics

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

A failed display (control panel) card — the most common outcome by far
A loose or damaged ribbon/communication lead between the panel and the main board
Moisture or detergent ingress behind the control panel
A fault on the main control board itself, which is much less common

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Turn the machine off at the wall socket, leave it for a minute, then switch back on and try a programme — an occasional one-off communication glitch will clear.
If the display comes back, run a short cycle and watch whether the fault returns. A code that reappears every time is a genuine hardware fault, not a glitch.

Which Beko models show E22

E22 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

7138341200

Common questions about Beko E22

What does E22 mean on a Beko washer dryer?

The control panel display has stopped talking to the machine's main board, so the washer dryer won't run a programme. E22 is an LCD communication failure — the display card and the main control board are no longer exchanging signals. The usual symptom is a blank or dead screen, or a display that lights up but the machine won't accept a programme. The machine stops because the control board can't confirm what has been selected or report back progress.

Can I fix Beko E22 myself?

There are 2 checks you can safely do yourself first.

Turn the machine off at the wall socket, leave it for a minute, then switch back on and try a programme — an occasional one-off communication glitch will clear.
If the display comes back, run a short cycle and watch whether the fault returns. A code that reappears every time is a genuine hardware fault, not a glitch.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Beko E22?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E22?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Beko washer dryer codes

All Beko fault codes and repairs →

What this looks like when it happens

washer dryer not drying

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Beko E22 error — washer dryer