What E07 actually means
The machine can't get a sensible reading from the sensor that tells it how much water is in the drum, so it stops rather than risk filling or draining blind.
Grundig machines use a pressure sensor (level sensor) connected to the tub by a small air hose to judge the water level. When the control board gets a reading it can't make sense of — or no reading at all — it flags E07 and halts, usually early in the cycle around filling. Some models also sound an error melody with it. Because the machine no longer knows whether it is empty or full, it won't continue.
What usually causes it
- The plug on the level sensor has worked loose or corroded
- The little air hose between the tub and the sensor is split, kinked or blocked with sludge
- A failed pressure/level sensor
- A fault on the control board's sensor circuit
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Switch the machine off at the wall for a minute, then turn it back on and start a short cycle — an occasional one-off reading error can clear.
- Check the drain hose isn't kinked or pushed too far down the standpipe, and clear the pump filter at the front so the drum isn't sitting with water in it.
When to call someone
This one usually needs an engineer once you have tried the checks above. We cover Nottinghamshire, Derbyshire and Leicestershire, and it's £66 including VAT for an engineer to come out and diagnose it — £84 in total if it's repaired on the visit with no parts needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Grundig washing machine codes
- Grundig E02 — The machine can't heat the water he heating element, so it …
- Grundig E03 — The machine has spotted that the heating element is staying …
- Grundig E04 — The machine has spotted that the part of the control board w…
- Grundig E05 — The machine can't get the water out — the drain pump either …
- Grundig E08 — The machine hasn't got enough water in the drum in the time …
- Grundig E09 — The machine can't lock the door, so it refuses to start fill…
- Grundig E10 — The machine has spotted a fault in the circuit on its main c…
- Grundig E11 — The machine has lost a proper electrical connection to the d…