What is actually happening
Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
The ElectriQ fault codes that point at this
A ElectriQ washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to beeping or bleeping:
- E00 — E00 isn't a fault — it's the machine telling you there are no stored error codes in its memory.
- E02 — The machine isn't getting water in, so it has stopped and shown E02.
- E03 — The machine hasn't managed to pump the water out in the time it expects, so it's stopped and flagged a draining problem.
- E10 — The machine has opened its water valves but not enough water has arrived, so it has given up filling and stopped.
- E12 — The machine has decided there is too much water in the drum, so it has pumped it all out and stopped.
- E20 — The machine has tried to drain and the water level hasn't moved, so it has shut the water valve and stopped with the drum still full.
- E21 — The machine has tried to empty the drum and the water level hasn't dropped, so it's stopped with a drum full of water.
- E30 — The machine cannot lock its door, so it refuses to start filling or washing.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a ElectriQ washing machine
- A drain fault — the most common reason a machine stops and bleeps
- A door lock fault, where the machine cannot confirm the door is shut
- A fill or water-level fault
- A heating or sensor fault reported as a code
What you can safely check yourself
- Write down the code shown, or the pattern of flashing lights, before you switch it off
- Check whether there is water left in the drum — that points straight at draining
- Look up the code on our error-code pages, which cover 708 codes across 24 makes
Still beeping or bleeping?
If the checks above have not sorted it, it needs looking at properly. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on ElectriQ machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my ElectriQ washing machine beeping or bleeping?
The machine is bleeping repeatedly, usually with a light flashing, and has stopped mid-cycle. Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
Can I fix a ElectriQ washing machine beeping or bleeping myself?
Write down the code shown, or the pattern of flashing lights, before you switch it off. Check whether there is water left in the drum — that points straight at draining. Look up the code on our error-code pages, which cover 708 codes across 24 makes. Those checks fix it more often than not.
What ElectriQ error codes mean beeping or bleeping?
ElectriQ washing machines report this through their own fault codes. The ones that point at beeping or bleeping are E00, E02, E03, E10, E12, E20. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a ElectriQ washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other ElectriQ washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open