Out-of-warranty ElectriQ repairs, done locally
If your ElectriQ appliance is still under the manufacturer's warranty, go to ElectriQ first — you should not be paying for that repair. Once it is out of warranty, you do not have to use them, and you will usually wait less and pay less if you do not.
We are a local firm with over 50 years in the trade, covering Nottinghamshire, Derbyshire and Leicestershire. The engineer who comes out is one of ours, not a subcontractor from a national call centre.
What it costs
£66 including VAT for an engineer to come out and diagnose the fault — that is the visit and the diagnosis, with nothing added on top. If it is repaired on the visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide.
Nothing is taken when you book, and every repair carries a 90-day workmanship guarantee — if our work is at fault in that time we come back and put it right at no charge.
What we hold for ElectriQ
We keep ElectriQ service documentation in-house, covering 273 ElectriQ models across 578 documents. For ElectriQ that includes manufacturer parts lists, exploded views and wiring diagrams and service manuals and technical bulletins.
It matters more than it sounds. It means the engineer arrives knowing how your machine comes apart, which part number fits your model rather than one that looks similar, and what the manufacturer says the fault actually is — instead of working it out on your kitchen floor at your expense. Most firms are reading the same user manual you have in the drawer.
ElectriQ error codes, explained
These are what the codes actually mean rather than a guess. Worth a read before you call anyone — some of them you can clear yourself in five minutes.
Washing machine
- ElectriQ E00 — E00 isn't a fault — it's the machine telling you there are no stored e…
- ElectriQ E02 — The machine isn't getting water in, so it has stopped and shown E02.
- ElectriQ E03 — The machine hasn't managed to pump the water out in the time it expect…
- ElectriQ E10 — The machine has opened its water valves but not enough water has arriv…
- ElectriQ E12 — The machine has decided there is too much water in the drum, so it has…
- ElectriQ E20 — The machine has tried to drain and the water level hasn't moved, so it…
- ElectriQ E21 — The machine has tried to empty the drum and the water level hasn't dro…
- ElectriQ E30 — The machine cannot lock its door, so it refuses to start filling or wa…
- ElectriQ E31 — The machine has tried to release the door lock and failed, so it has g…
- ElectriQ E33 — The machine has lost the signal from the sensor that tells it how much…
- ElectriQ E36 — The machine isn't heating the water \u2014 it has run the heater for t…
- ElectriQ E37 — The sensor that measures the air temperature at the machine's drying i…
- ElectriQ E38 — The machine isn't getting a sensible temperature reading from the sens…
- ElectriQ E40 — The machine's control board can't read its own stored settings properl…
- ElectriQ E41 — The machine's control board has failed its own memory check, so it won…
- ElectriQ E50 — The board that drives the motor has picked up a signal it isn't happy …
- ElectriQ E61 — The control board has lost the signal that tells it how fast the drum …
- ElectriQ E62 — The drum motor is spinning faster than the machine asked it to, so the…
- ElectriQ E64 — The machine's main control board has lost contact with the board that …
- ElectriQ E70 — The machine thinks one of the buttons on the front is being held down,…
- ElectriQ E80 — The two circuit boards inside the machine — the one behind the buttons…
- ElectriQ F01 — The machine isn't getting the water it expects, so it has stopped and …
- ElectriQ F03 — The machine can't get the water out fast enough, so it has stopped and…
- ElectriQ F04 — The washing machine's main electronic control board has reported a fau…
- ElectriQ F13 — The machine can't confirm the door is locked, so it won't run.
- ElectriQ F14 — The machine doesn't believe the door is properly shut, so it won't sta…
- ElectriQ F24 — The machine thinks there's too much water in the drum, so it has stopp…
- ElectriQ F98 — The machine's own control electronics have reported a fault they can't…
Tumble dryer
- ElectriQ E00 — E00 isn't a fault at all echecking the machine's error memory and find…
- ElectriQ E02 — The machine has asked for water and not received enough of it in the t…
- ElectriQ E03 — The machine can't get rid of the water — it has either failed to drain…
- ElectriQ E12 — The machine has sensed too much water in the drum, pumped it out and s…
- ElectriQ E36 — The machine has run the water heater for ten minutes and the water bar…
- ElectriQ E37 — The sensor that measures the temperature of the air being drawn in for…
- ElectriQ E38 — The dryer has stopped because the temperature sensor at the exhaust ou…
- ElectriQ E50 — The board that drives the drum motor has spotted something it doesn't …
- ElectriQ E61 — The control board has lost the signal that tells it how fast the drum …
- ElectriQ E62 — The drum motor is spinning faster than the machine asked it to, so the…
- ElectriQ E64 — The main control board has lost contact with the board that drives the…
- ElectriQ E80 — The two circuit boards inside the machine \u2014 the main control boar…
Fridge freezer
- ElectriQ E00 — The fridge freezer has lost a reliable reading from one of its tempera…
- ElectriQ E01 — The fridge freezer has lost a reliable reading from one of its tempera…
- ElectriQ E02 — The fridge freezer has lost a reliable reading from the freezer temper…
- ElectriQ E03 — The wine cooler has lost the signal from its defrost sensor hough it w…
- ElectriQ E04 — The cooler has lost a sensible reading from its defrost sensor and has…
- ElectriQ E05 — The appliance has lost the signal from the temperature sensor in the l…
- ElectriQ E06 — The appliance has lost a sensible reading from one of its temperature …
- ElectriQ E07 — The freezer's control board has lost a sensible reading from one of it…
- ElectriQ E10 — The control panel thinks one of its buttons is being held down when it…
Washer dryer
- ElectriQ E02 — The machine hasn't taken in enough water in the time it expects, so it…
- ElectriQ E03 — The machine can't get the water out of the drum, so it has stopped and…
- ElectriQ F21 — The control panel and the main power board have stopped talking to eac…
- ElectriQ F50 — One of the machine's sensors is giving a reading the control board doe…
- ElectriQ F51 — One of the machine's sensors is giving a reading the control board doe…
Dishwasher
- ElectriQ E02 — The dishwasher isn't getting the water it expects, so it has stopped t…
- ElectriQ E03 — The water isn't getting hot when it should, so the dishwasher gives up…
- ElectriQ E04 — The dishwasher has spotted a problem with the valve that switches wate…
- ElectriQ E06 — The dishwasher has lost the signal from its water temperature sensor, …
- ElectriQ E07 — The dishwasher has lost a sensible reading from its water temperature …
- ElectriQ E08 — The dishwasher has lost control of the valve that switches water betwe…
- ElectriQ E09 — The dishwasher thinks one of its buttons is being held down and has st…
ElectriQ appliances we repair
- Washing Machine Repairs
- Fridge & Freezer Repairs
- Dishwasher Repairs
- Oven Repairs
- Cooker Repairs
- Tumble Dryer Repairs
- Freezer Repairs
- Washer Dryer Repairs
- Electric & Induction Hob Repairs
- Cooker Hood & Extractor Repairs
Common questions
My ElectriQ is still under warranty — should I call you?
No. Go to ElectriQ first, or to the retailer you bought it from. If it is in warranty that repair should not cost you anything, and we would only be charging you for something you can have free. Come to us once it is out of warranty — you are not obliged to use the manufacturer then, and you will usually wait less and pay less.
What does a ElectriQ repair cost?
£66 including VAT for an engineer to come out and diagnose the fault. If it is fixed on that visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide. Nothing is taken when you book.
My ElectriQ is showing an error code — what does it mean?
We have written up 61 ElectriQ codes from the manufacturer's own service data, in plain English rather than a guess. They are linked further down this page. Some of them you can clear yourself in five minutes without paying anyone.
Can you get parts for a ElectriQ?
Usually, yes. We hold the manufacturer's parts lists for 273 ElectriQ models, so the part is ordered against your actual model number rather than something that looks close. Where a part is genuinely discontinued we will tell you that plainly rather than order it and hope.
Is it worth repairing a ElectriQ appliance or should I replace it?
That depends on what is wrong and how old it is, and we will tell you straight. If the repair is going to cost more than the machine is worth, we say so — you have paid £66 to find that out, which is a good deal cheaper than replacing something that had five years left in it.
Do you cover my area?
We cover Nottinghamshire, Derbyshire and Leicestershire — the NG, DE and LE postcodes. Put your postcode into the form at the top of the page and it will tell you straight away.
How soon can someone come out?
Same day or next day in most of our area. Tell us what the appliance is doing using the form above and you will get a price and the slots we have left.
Getting someone out
Use the form at the top of the page for a price, call 0115 648 0929, or use the chat in the corner — it can check your postcode and book you in.
