What is actually happening
Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
The Electrolux fault codes that point at this
A Electrolux washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to beeping or bleeping:
- C11 — C11 isn't a fault at all — it's the engineer's diagnostic menu position that plays back the machine's last three stored error codes.
- E00 — E00 isn't a fault \u2014 it's the machine telling you no errors are stored in its memory.
- E10 — The machine isn't getting water in fast enough, so it has paused and is asking you to check the tap.
- E11 — The machine hasn't taken in enough water in the time allowed, so it has paused the cycle.
- E12 — The machine tried to take in water during the drying part of the cycle and didn't get enough within the time allowed, so it has paused with the door locked.
- E13 — The machine has had to keep topping itself up with water during the cycle, which tells the control board water is escaping somewhere — so it drains down and stops with the door locked.
- E20 — The machine can't get the water out, and Electrolux flags it as a blocked drain filter.
- E21 — The machine hasn't managed to pump the water out in the time allowed, so it has paused the cycle with the door locked and water still in the drum.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a Electrolux washing machine
- A drain fault — the most common reason a machine stops and bleeps
- A door lock fault, where the machine cannot confirm the door is shut
- A fill or water-level fault
- A heating or sensor fault reported as a code
What you can safely check yourself
- Write down the code shown, or the pattern of flashing lights, before you switch it off
- Check whether there is water left in the drum — that points straight at draining
- Look up the code on our error-code pages, which cover 708 codes across 24 makes
Still beeping or bleeping?
If the checks above have not sorted it, it needs looking at properly. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on Electrolux machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my Electrolux washing machine beeping or bleeping?
The machine is bleeping repeatedly, usually with a light flashing, and has stopped mid-cycle. Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
Can I fix a Electrolux washing machine beeping or bleeping myself?
Write down the code shown, or the pattern of flashing lights, before you switch it off. Check whether there is water left in the drum — that points straight at draining. Look up the code on our error-code pages, which cover 708 codes across 24 makes. Those checks fix it more often than not.
What Electrolux error codes mean beeping or bleeping?
Electrolux washing machines report this through their own fault codes. The ones that point at beeping or bleeping are C11, E00, E10, E11, E12, E13. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a Electrolux washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other Electrolux washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open