What is actually happening
The noise and when it happens narrow it down quickly. A rhythmic knock at low speed is usually an object trapped between the inner and outer drum. A roar or grind that rises with spin speed, especially with black marks appearing on washing, is worn drum bearings — and that is the one that gets worse and eventually leaks.
The Montpellier fault codes that point at this
A Montpellier washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to making a loud noise:
- E02 — The machine isn't getting enough water in the time it expects, so it has stopped the wash.
- E03 — The machine has spotted that the water heater is staying switched on when it shouldn't be, so it has stopped the wash to be safe.
- E04 — The machine thinks it's taking in too much water and has shut the cycle down to stop a flood.
- E06 — The machine has lost the signal that tells it how fast the drum is turning, so it won't run the motor.
- E07 — The washing machine's control board has lost or mismatched its settings, so it doesn't know which model it is meant to be running as and stops.
- E08 — The machine has detected that the electricity reaching it is outside the range it needs, so it has stopped rather than run on a bad supply.
- E09 — The machine has detected that the mains electricity reaching it is outside the range it's designed to run on, so it has stopped the cycle.
- E11 — The machine has lost contact with the drum motor, so it won't turn the drum.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a Montpellier washing machine
- A coin, underwire or screw trapped between the inner and outer drum
- Worn drum bearings — a grinding roar on spin, often with black or silver marks on clothes
- Transit bolts never removed after delivery, or the machine not sitting level on all four feet
- A worn shock absorber or broken suspension spring, letting the drum bang the casing
- A failing motor bearing or a worn belt slapping the pulley
What you can safely check yourself
- Empty the drum and rock the inner drum firmly by hand — noticeable play front to back points at bearings
- Spin the empty drum by hand and listen for grinding
- Check the machine is level and that all four feet are on the floor, and confirm the transit bolts were removed
- Check the filter for coins and underwires, which is where they usually end up
Still making a loud noise?
Most of these need an engineer once the checks above are done. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on Montpellier machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my Montpellier washing machine making a loud noise?
A new noise — grinding, banging or rumbling — usually means either something loose in the drum or worn drum bearings. The noise and when it happens narrow it down quickly. A rhythmic knock at low speed is usually an object trapped between the inner and outer drum. A roar or grind that rises with spin speed, especially with black marks appearing on washing, is worn drum bearings — and that is the one that gets worse and eventually leaks.
Can I fix a Montpellier washing machine making a loud noise myself?
Empty the drum and rock the inner drum firmly by hand — noticeable play front to back points at bearings. Spin the empty drum by hand and listen for grinding. Check the machine is level and that all four feet are on the floor, and confirm the transit bolts were removed. Check the filter for coins and underwires, which is where they usually end up. Beyond those checks this one normally needs an engineer.
What Montpellier error codes mean making a loud noise?
Montpellier washing machines report this through their own fault codes. The ones that point at making a loud noise are E02, E03, E04, E06, E07, E08. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a Montpellier washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other Montpellier washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine not heating the water
- washing machine door will not open
- washing machine will not turn on