Blomberg E14 fridge freezer: what it means & what to check

What E14 actually means

One of the fridge freezer's internal cooling fans has stopped giving the control board the signal it expects, so the board has flagged it as faulty.

The fault for this board lists E14 as a fan error — specifically the fan serving one of the cabinet's temperature-controlled compartments, not the freezer fan (that one logs E13) or the condenser fan (E15). These fans report their speed back to the control board; if the board sees no feedback, or a speed well outside what it asked for, it logs the code. What you notice first is usually uneven cooling — one compartment drifting warmer while the rest of the appliance seems normal — and often the absence of the usual faint fan noise when the compressor is running.

What E14 looks like on a Blomberg fridge freezer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Blomberg fridge freezer, E14 usually shows up as one or more of these:

Fridge freezer door won't open
Door won't lock or click shut
Door lock light flashing
Door stuck shut with the load inside
Won't start even with the door closed
Fridge freezer not draining
Water left in the machine at the end of the cycle
Stops mid-cycle full of water

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Ice built up around the fan blade so it cannot turn freely
Food packaging or a stray bag pressed against the fan or blocking the air vents
Worn or seized fan motor
Damaged wiring or a loose plug at the fan motor
Control board no longer reading the fan's speed signal correctly

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Take out any packets, boxes or bags sitting against the back or side vents inside the compartment — blocked airflow is the most common innocent cause
Look for frost or a block of ice near the vents at the back of the compartment; if there is a lot, empty the appliance and let it defrost fully with the door open before switching back on
Check the door is closing and sealing properly and that the seal is clean, as warm air getting in causes ice to build where the fan runs
Turn it off at the wall for a minute, then back on — if the fan is now running normally the code should clear

Which Blomberg models show E14

E14 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

7287745715

Common questions about Blomberg E14

What does E14 mean on a Blomberg fridge freezer?

One of the fridge freezer's internal cooling fans has stopped giving the control board the signal it expects, so the board has flagged it as faulty. The fault for this board lists E14 as a fan error — specifically the fan serving one of the cabinet's temperature-controlled compartments, not the freezer fan (that one logs E13) or the condenser fan (E15). These fans report their speed back to the control board; if the board sees no feedback, or a speed well outside what it asked for, it logs the code. What you notice first is usually uneven cooling — one compartment drifting warmer while the rest of the appliance seems normal — and often the absence of the usual faint fan noise when the compressor is running.

Can I fix Blomberg E14 myself?

There are 4 checks you can safely do yourself first.

Take out any packets, boxes or bags sitting against the back or side vents inside the compartment — blocked airflow is the most common innocent cause.
Look for frost or a block of ice near the vents at the back of the compartment; if there is a lot, empty the appliance and let it defrost fully with the door open before switching back on.
Check the door is closing and sealing properly and that the seal is clean, as warm air getting in causes ice to build where the fan runs.
Turn it off at the wall for a minute, then back on — if the fan is now running normally the code should clear.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Blomberg E14?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E14?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most fridge freezer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Blomberg fridge freezer codes

All Blomberg fault codes and repairs →

What this looks like when it happens

Repairs we cover near you

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Blomberg E14 error — fridge freezer