Out-of-warranty Blomberg repairs, done locally
If your Blomberg appliance is still under the manufacturer's warranty, go to Blomberg first — you should not be paying for that repair. Once it is out of warranty, you do not have to use them, and you will usually wait less and pay less if you do not.
We are a local firm with over 50 years in the trade, covering Nottinghamshire, Derbyshire and Leicestershire. The engineer who comes out is one of ours, not a subcontractor from a national call centre.
What it costs
£66 including VAT for an engineer to come out and diagnose the fault — that is the visit and the diagnosis, with nothing added on top. If it is repaired on the visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide.
Nothing is taken when you book, and every repair carries a 90-day workmanship guarantee — if our work is at fault in that time we come back and put it right at no charge.
What we hold for Blomberg
We keep Blomberg service documentation in-house, covering 66 Blomberg models across 1,589 documents. For Blomberg that includes manufacturer parts lists, exploded views and wiring diagrams, the manufacturer’s own fault-finding procedures and service manuals and technical bulletins.
It matters more than it sounds. It means the engineer arrives knowing how your machine comes apart, which part number fits your model rather than one that looks similar, and what the manufacturer says the fault actually is — instead of working it out on your kitchen floor at your expense. Most firms are reading the same user manual you have in the drawer.
Blomberg error codes, explained
These are what the codes actually mean rather than a guess. Worth a read before you call anyone — some of them you can clear yourself in five minutes.
Washing machine
- Blomberg C01 — C01 isn't a fault at all — it's the last second of the three-second co…
- Blomberg C02 — This isn't a fault — it's the middle of the three-second countdown the…
- Blomberg C03 — This isn't a fault at all — it's the three-second countdown the displa…
- Blomberg E00 — E00 isn't a fault at all — it's the delay timer showing zero, meaning …
- Blomberg E01 — The machine can't read the water temperature — the sensor that tells i…
- Blomberg E02 — The machine can't get a signal through its heating element, so it has …
- Blomberg E03 — The control board has spotted that the heating element is staying swit…
- Blomberg E04 — The control board has lost control of the water inlet valve — the mach…
- Blomberg E05 — The machine cannot get the water out — the drain pump either isn't tur…
- Blomberg E06 — The circuit on the main control board that switches power to the drum …
- Blomberg E07 — The machine can't tell how much water is in the drum, so it stops rath…
- Blomberg E08 — The machine isn't getting enough water in, so it has stopped and flagg…
- Blomberg E09 — The machine cannot lock the door, so it refuses to start the wash.
- Blomberg E10 — The circuit on the main control board that switches your door lock has…
- Blomberg E11 — The machine has lost the electrical connection it needs to drive or mo…
- Blomberg E12 — The machine has found water where it shouldn't be — the level has rise…
- Blomberg E13 — The control board has lost its communication link with the motor — the…
- Blomberg E15 — The machine has lost a sensible reading from its flowmeter — the small…
- Blomberg E17 — The machine has found too much foam in the drum and paused to deal wit…
- Blomberg E18 — The washing machine couldn't spin because the load inside was unevenly…
- Blomberg E20 — The machine has spotted a fault in the electronics that switch the doo…
- Blomberg E21 — The machine has decided there is more water in the drum than the pump …
- Blomberg E25 — The control panel and the machine's main circuit board have stopped ta…
- Blomberg E28 — The control board isn't getting the confirmation signal that the door …
- Blomberg E29 — The machine has measured the mains electricity coming into it and foun…
- Blomberg E32 — The temperature sensor in the drying section is giving a reading the m…
- Blomberg E71 — The machine can't get a sensible reading from the sensor that watches …
- Blomberg E82 — The machine has found a fault in the electronic switch on its main con…
- Blomberg E84 — The machine can't connect to its Wi-Fi/Bluetooth side, so the app feat…
- Blomberg E87 — The machine isn't happy with the water flow through the detergent draw…
- Blomberg E91 — The main control board has lost control of the circuit that powers the…
- Blomberg F01 — The machine has lost a sensible reading from its water temperature sen…
- Blomberg F02 — The machine has lost the electrical connection to its heating element,…
- Blomberg F03 — The machine has spotted a problem with the water heating — the heater …
- Blomberg F05 — The machine has failed to get the water out, and it has flagged the dr…
- Blomberg F07 — The machine thinks it cannot get a trustworthy reading of the water le…
- Blomberg F09 — The control board has lost the ability to switch the door lock on and …
- Blomberg F10 — The control board has found a fault in its own door-lock switching cir…
- Blomberg F11 — The drum has stopped turning and the machine has flagged a fault with …
- Blomberg F13 — The main control board has lost contact with the motor's own control b…
Fridge freezer
- Blomberg E00 — The sensor that measures the air temperature inside the freezer has st…
- Blomberg E01 — The control board has lost a sensible reading from one of the freezer'…
- Blomberg E02 — The fridge section's evaporator sensor — the probe that watches the te…
- Blomberg E03 — The sensor that measures the air temperature inside the fridge section…
- Blomberg E04 — The heater that melts frost off the freezer's cooling coil isn't doing…
- Blomberg E08 — The temperature sensor inside the automatic ice maker has stopped givi…
- Blomberg E09 — The automatic ice maker isn't turning as it should, so the fridge free…
- Blomberg E10 — The temperature sensor for the convertible "joker" compartment — the o…
- Blomberg E11 — The temperature sensor on the evaporator (the cooling coil) in the con…
- Blomberg E12 — The heater that melts frost off the cooling plate in the convertible f…
- Blomberg E13 — The control board has decided the motorised flap that lets cold air in…
- Blomberg E14 — One of the fridge freezer's internal cooling fans has stopped giving t…
- Blomberg E15 — The control board has lost the expected signal from the condenser fan …
- Blomberg E16 — The fan that circulates cold air around the fridge section isn't runni…
- Blomberg E17 — The fridge freezer has spotted a problem with the flap fan — one of t…
- Blomberg E18 — The fan that circulates cold air through the BioFresh compartment isn'…
- Blomberg E19 — The fridge has lost a proper reading from the temperature sensor that …
- Blomberg E20 — The temperature sensor that watches the BioFRESH compartment is giving…
- Blomberg E21 — The fridge section got too warm for too long, and the appliance is tel…
- Blomberg E22 — The fridge freezer can't get onto your home Wi-Fi network, and it's st…
- Blomberg E23 — The fridge freezer tried to join your home Wi-Fi, could not get connec…
- Blomberg E24 — The control board has lost the fridge compartment's circulation fan — …
Hob
- Blomberg E01 — The hob has lost a sensible reading from one of the temperature sensor…
- Blomberg E04 — The hob's own temperature sensor is giving a reading that doesn't chan…
Washer dryer
Blomberg appliances we repair
- Washing Machine Repairs
- Fridge & Freezer Repairs
- Dishwasher Repairs
- Oven Repairs
- Cooker Repairs
- Tumble Dryer Repairs
- Freezer Repairs
- Washer Dryer Repairs
- Electric & Induction Hob Repairs
- Cooker Hood & Extractor Repairs
Common questions
My Blomberg is still under warranty — should I call you?
No. Go to Blomberg first, or to the retailer you bought it from. If it is in warranty that repair should not cost you anything, and we would only be charging you for something you can have free. Come to us once it is out of warranty — you are not obliged to use the manufacturer then, and you will usually wait less and pay less.
What does a Blomberg repair cost?
£66 including VAT for an engineer to come out and diagnose the fault. If it is fixed on that visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide. Nothing is taken when you book.
My Blomberg is showing an error code — what does it mean?
We have written up 65 Blomberg codes from the manufacturer's own service data, in plain English rather than a guess. They are linked further down this page. Some of them you can clear yourself in five minutes without paying anyone.
Can you get parts for a Blomberg?
Usually, yes. We hold the manufacturer's parts lists for 66 Blomberg models, so the part is ordered against your actual model number rather than something that looks close. Where a part is genuinely discontinued we will tell you that plainly rather than order it and hope.
Is it worth repairing a Blomberg appliance or should I replace it?
That depends on what is wrong and how old it is, and we will tell you straight. If the repair is going to cost more than the machine is worth, we say so — you have paid £66 to find that out, which is a good deal cheaper than replacing something that had five years left in it.
Do you cover my area?
We cover Nottinghamshire, Derbyshire and Leicestershire — the NG, DE and LE postcodes. Put your postcode into the form at the top of the page and it will tell you straight away.
How soon can someone come out?
Same day or next day in most of our area. Tell us what the appliance is doing using the form above and you will get a price and the slots we have left.
Getting someone out
Use the form at the top of the page for a price, call 0115 648 0929, or use the chat in the corner — it can check your postcode and book you in.
