Blomberg E24 fridge freezer: what it means & what to check

What E24 actually means

The control board has lost the fridge compartment's circulation fan — the fan that moves cold air around the fresh food section isn't running or isn't reporting back as it should.

E24 is a fresh food (fridge) fan error. The board watches the fan's feedback signal, and when the fan doesn't spin up or the signal goes missing it flags the fault and shows the code rather than carrying on blind. Without that fan the cold air stops circulating properly, so you'll often see the fridge side drifting warm, or one shelf cold and another not, while the freezer side seems fine.

What E24 looks like on a Blomberg fridge freezer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Blomberg fridge freezer, E24 usually shows up as one or more of these:

Fridge freezer door won't open
Door won't lock or click shut
Door lock light flashing
Door stuck shut with the load inside
Won't start even with the door closed
Fridge freezer not draining
Water left in the machine at the end of the cycle
Stops mid-cycle full of water

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Ice or frost built up around the fan blades, jamming them
Failed fan motor in the fridge compartment
Loose or damaged wiring to the fan, or a broken plug connection
Food or packaging pushed hard against the air outlet at the back of the fridge
Fault on the control board reading the fan's feedback signal

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Move food and bags away from the vents at the back and top of the fridge compartment so air can circulate, and don't overpack the shelves
Check the door is closing and sealing properly — a door left ajar or a seal held open by a shelf edge leads to frost building up around the fan
Look for obvious frost or ice over the vent grille inside the fridge; if there is a lot, emptying the fridge and letting it stand switched off with the door open to defrost fully can clear a jammed fan
Switch off at the wall for a minute, then power back up — if the fan was only briefly stalled the code can clear

Which Blomberg models show E24

E24 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

7287745715

Common questions about Blomberg E24

What does E24 mean on a Blomberg fridge freezer?

The control board has lost the fridge compartment's circulation fan — the fan that moves cold air around the fresh food section isn't running or isn't reporting back as it should. E24 is a fresh food (fridge) fan error. The board watches the fan's feedback signal, and when the fan doesn't spin up or the signal goes missing it flags the fault and shows the code rather than carrying on blind. Without that fan the cold air stops circulating properly, so you'll often see the fridge side drifting warm, or one shelf cold and another not, while the freezer side seems fine.

Can I fix Blomberg E24 myself?

There are 4 checks you can safely do yourself first.

Move food and bags away from the vents at the back and top of the fridge compartment so air can circulate, and don't overpack the shelves.
Check the door is closing and sealing properly — a door left ajar or a seal held open by a shelf edge leads to frost building up around the fan.
Look for obvious frost or ice over the vent grille inside the fridge; if there is a lot, emptying the fridge and letting it stand switched off with the door open to defrost fully can clear a jammed fan.
Switch off at the wall for a minute, then power back up — if the fan was only briefly stalled the code can clear.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Blomberg E24?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E24?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most fridge freezer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Blomberg fridge freezer codes

All Blomberg fault codes and repairs →

What this looks like when it happens

Repairs we cover near you

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Blomberg E24 error — fridge freezer