What E41 actually means
The machine can't confirm the door is shut and locked, so it won't start or continue the cycle.
Before it will run, the washer dryer has to lock the door and get confirmation back that it is locked. On this model the control gives the lock a short window to do that and retries a few times; if it still reads the door as open, the cycle pauses and E41 appears. It is a door-detection fault, not a wash or drying fault or confirmation it never gets.
What E41 looks like on a Electrolux washer dryer
Most people find this page having searched for what the machine is doing rather than the code itself. On a Electrolux washer dryer, E41 usually shows up as one or more of these:
- Machine door won't open
- Door won't lock or click shut
- Door lock light flashing
- Door stuck shut with the load inside
- Won't start even with the door closed
- No function at all
- Dead — nothing lights up
- Lights flashing and nothing happening
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- Door not pushed fully home agin the seal, or laundry trapped in the opening
- A worn or slack door catch that no longer seats deep enough for the lock to engage
- Faulty door lock unit o not sending back the confirmation signal
- Broken or loose wiring between the door lock and the control board
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Open the door, clear any laundry caught around the seal, and close it firmly until you hear it latch not a light push
- Look for a sock or towel hooked over the lip of the door opening
- Wipe the seal and the latch area detergent residue and grit can stop the door seating properly
- Press Start/Pause this code clears on Start/Pause or by resetting the cycle; switching the machine off at the wall alone will not clear it
Which Electrolux models show E41
E41 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.
EA2F6820CF
Common questions about Electrolux E41
What does E41 mean on a Electrolux washer dryer?
The machine can't confirm the door is shut and locked, so it won't start or continue the cycle. Before it will run, the washer dryer has to lock the door and get confirmation back that it is locked. On this model the control gives the lock a short window to do that and retries a few times; if it still reads the door as open, the cycle pauses and E41 appears. It is a door-detection fault, not a wash or drying fault or confirmation it never gets.
Can I fix Electrolux E41 myself?
There are 4 checks you can safely do yourself first.
- Open the door, clear any laundry caught around the seal, and close it firmly until you hear it latch not a light push.
- Look for a sock or towel hooked over the lip of the door opening.
- Wipe the seal and the latch area detergent residue and grit can stop the door seating properly.
- Press Start/Pause this code clears on Start/Pause or by resetting the cycle; switching the machine off at the wall alone will not clear it.
This sometimes clears with those checks. If it comes back, it needs looking at properly.
How much does it cost to repair Electrolux E41?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing E41?
This sometimes clears with the checks above. If it comes back, it needs looking at properly. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Electrolux washer dryer codes
- Electrolux E42 — The door won't unlock when the machine asks it to, so the cy…
- Electrolux E44 — The machine can no longer tell reliably whether the door is …
- Electrolux E52 — The control board has lost the signal that tells it how fast…
- Electrolux E53 — The control board has spotted the wrong voltage on the circu…
- Electrolux E54 — The control board has found that one of the relays that swit…
- Electrolux E57 — The machine has detected a sudden surge of current in the mo…
- Electrolux E58 — The board that drives the motor has seen a sudden surge of c…
- Electrolux E59 — The control board has told the motor to start turning but is…
All Electrolux fault codes and repairs →