Grundig E06 washing machine: what it means & what to check

Stop using it for now. Carrying on with this fault risks further damage or a leak. Switch it off at the wall until it has been looked at.

What E06 actually means

The control board's switching component for the drum motor has failed short, so the machine can no longer control the motor properly and stops the programme.

Grundig uses a triac on the main electronic board to switch power to the drum motor. On these models the board has detected that triac either shorted out or behaving as a diode (passing current only one way), which means motor speed can no longer be controlled reliably, so the wash is abandoned. Typically the drum turns a few times, then the programme ends early without finishing. The fault notes tie this code to machines fitted with the UMDC type motor.

What E06 looks like on a Grundig washing machine

Most people find this page having searched for what the machine is doing rather than the code itself. On a Grundig washing machine, E06 usually shows up as one or more of these:

Drum not turning
Won't spin
Hums or buzzes but nothing moves
Turns one way only
No function at all
Dead — nothing lights up
Lights flashing and nothing happening
Programme won't start

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Failed motor triac on the main control board
Damage to the board's motor output circuit after a surge or spike
A short in the motor wiring pulling the switching device down with it
A faulty motor drawing excess current and taking out the triac

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Turn the machine off at the wall for a minute, then power it back up and start a short programme — if the code returns straight away it is a genuine board fault, not a glitch
Take note of what the drum does before it stops (a few turns then a dead stop is the usual pattern) as it helps the engineer confirm the diagnosis

Which Grundig models show E06

E06 means the same thing on all 2 of these models. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

7134541300 · 7142641100

Common questions about Grundig E06

What does E06 mean on a Grundig washing machine?

The control board's switching component for the drum motor has failed short, so the machine can no longer control the motor properly and stops the programme. Grundig uses a triac on the main electronic board to switch power to the drum motor. On these models the board has detected that triac either shorted out or behaving as a diode (passing current only one way), which means motor speed can no longer be controlled reliably, so the wash is abandoned. Typically the drum turns a few times, then the programme ends early without finishing. The fault notes tie this code to machines fitted with the UMDC type motor.

Can I fix Grundig E06 myself?

There are 2 checks you can safely do yourself first.

Turn the machine off at the wall for a minute, then power it back up and start a short programme — if the code returns straight away it is a genuine board fault, not a glitch.
Take note of what the drum does before it stops (a few turns then a dead stop is the usual pattern) as it helps the engineer confirm the diagnosis.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Grundig E06?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E06?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washing machine faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Grundig washing machine codes

All Grundig fault codes and repairs →

What this looks like when it happens

Repairs we cover near you

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Grundig E06 error — washing machine