Servis E06 washer dryer: what it means & what to check

Stop using it for now. Carrying on with this fault risks further damage or a leak. Switch it off at the wall until it has been looked at.

What E06 actually means

The control board has lost confidence in the drum motor ing back the signals it expects, so it shuts the cycle down.

E06 on the LD752W is logged as a motor fault. The board drives the motor and watches the feedback coming back from it; if the speed, direction or feedback signal doesn't match what was commanded, the wash is stopped rather than allowed to continue. In practice you'll usually see the drum stall, fail to spin up, or the programme halt part-way with the door still locked. The Vestel service notes also flag environmental conditions before anything else, and say not to run the machine until those are right \\\ so a machine that has been stood somewhere very cold or damp needs to come up to normal room conditions first.

What E06 looks like on a Servis washer dryer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Servis washer dryer, E06 usually shows up as one or more of these:

Machine door won't open
Door won't lock or click shut
Door lock light flashing
Door stuck shut with the load inside
Won't start even with the door closed
Drum not turning
Won't spin
Hums or buzzes but nothing moves

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Worn motor brushes or a worn motor on an older machine
A loose or damaged connection between the motor and the control board
Very cold, damp or otherwise unsuitable conditions where the machine is installed
A drum that is jammed or heavily overloaded, so the motor can't reach the commanded speed
A fault on the control board's motor drive circuit

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Turn the machine off at the wall for a minute, then back on, and try a short cycle \u2014 a single glitch can log the fault without the motor being faulty
If the drum is packed tight, take some of the load out and restart
Turn the drum by hand with the machine switched off; it should move freely, and anything that grinds or won't budge tells you the fault is mechanical
If the machine has been in an unheated garage or outbuilding, let it warm up to normal room temperature before running it again

Which Servis models show E06

E06 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

LD752W

Common questions about Servis E06

What does E06 mean on a Servis washer dryer?

The control board has lost confidence in the drum motor ing back the signals it expects, so it shuts the cycle down. E06 on the LD752W is logged as a motor fault. The board drives the motor and watches the feedback coming back from it; if the speed, direction or feedback signal doesn't match what was commanded, the wash is stopped rather than allowed to continue. In practice you'll usually see the drum stall, fail to spin up, or the programme halt part-way with the door still locked. The Vestel service notes also flag environmental conditions before anything else, and say not to run the machine until those are right \\\ so a machine that has been stood somewhere very cold or damp needs to come up to normal room conditions first.

Can I fix Servis E06 myself?

There are 4 checks you can safely do yourself first.

Turn the machine off at the wall for a minute, then back on, and try a short cycle \u2014 a single glitch can log the fault without the motor being faulty.
If the drum is packed tight, take some of the load out and restart.
Turn the drum by hand with the machine switched off; it should move freely, and anything that grinds or won't budge tells you the fault is mechanical.
If the machine has been in an unheated garage or outbuilding, let it warm up to normal room temperature before running it again.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Servis E06?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E06?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Servis washer dryer codes

All Servis fault codes and repairs →

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Servis E06 error — washer dryer