What is actually happening
Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
The Haden fault codes that point at this
A Haden washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to beeping or bleeping:
- E00 — On these Haden machines E00 isn't a fault at all ing the memory is empty \\ it means the machine has no stored error codes.
- E01 — The machine hasn't taken on enough water in the time it allows, so it has stopped and flagged a fill problem.
- E03 — The machine has tried to pump the water out and hasn't emptied within the time it allows, so it has stopped with the drum still holding water.
- E05 — The drum motor isn't running as the control board expects, so the machine has stopped rather than carry on with the wash.
- E06 — The machine has decided the water heater isn't doing its job, so it has stopped rather than carry on with a cold wash.
- E10 — The machine isn't getting enough water in, so it has stopped and flagged E10.
- E12 — The machine has sensed more water in the drum than it should have, so it has stopped the cycle to avoid flooding.
- E36 — The machine has found a break in the circuit that heats the water, so it has stopped rather than carry on washing cold.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a Haden washing machine
- A drain fault — the most common reason a machine stops and bleeps
- A door lock fault, where the machine cannot confirm the door is shut
- A fill or water-level fault
- A heating or sensor fault reported as a code
What you can safely check yourself
- Write down the code shown, or the pattern of flashing lights, before you switch it off
- Check whether there is water left in the drum — that points straight at draining
- Look up the code on our error-code pages, which cover 708 codes across 24 makes
Still beeping or bleeping?
If the checks above have not sorted it, it needs looking at properly. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on Haden machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my Haden washing machine beeping or bleeping?
The machine is bleeping repeatedly, usually with a light flashing, and has stopped mid-cycle. Constant bleeping is a fault warning rather than a fault in itself — the machine has stopped and is trying to tell you why. On most makes the pattern of flashing lights, or a code in the display, identifies it. Count the flashes and note any code before switching it off, because that reading is the fastest route to the right part.
Can I fix a Haden washing machine beeping or bleeping myself?
Write down the code shown, or the pattern of flashing lights, before you switch it off. Check whether there is water left in the drum — that points straight at draining. Look up the code on our error-code pages, which cover 708 codes across 24 makes. Those checks fix it more often than not.
What Haden error codes mean beeping or bleeping?
Haden washing machines report this through their own fault codes. The ones that point at beeping or bleeping are E00, E01, E03, E05, E06, E10. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a Haden washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other Haden washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open