Electrolux E94 washer dryer: what it means & what to check

Stop using it for now. Carrying on with this fault risks further damage or a leak. Switch it off at the wall until it has been looked at.

What E94 actually means

The washer dryer has found that the wash programme data stored in its own memory doesn't match the check figure it expects, so it refuses to start any cycle.

Every time it powers up, the main control board reads its stored configuration and works out a checksum for it, then compares that with the checksum written alongside. The cycle configuration is held in two parts and both must agree; if either doesn't, the board treats the programme data as unreliable and blocks the machine, showing E94. It's a software/configuration fault rather than a mechanical one — nothing to do with pumps, filters or the door.

What E94 looks like on a Electrolux washer dryer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Electrolux washer dryer, E94 usually shows up as one or more of these:

Machine door won't open
Door won't lock or click shut
Door lock light flashing
Door stuck shut with the load inside
Won't start even with the door closed
No function at all
Dead — nothing lights up
Lights flashing and nothing happening

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Corrupted cycle configuration data in the control board's memory
A read error from the board's memory chip after a power interruption or supply spike
The wrong configuration file loaded onto the board — often after a control board has been replaced and not set up for the exact model
A failing main control board

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Turn the machine off at the wall socket, leave it a minute, then switch back on — the checksum is only tested at power-up, and a one-off read error can clear
If the code returns immediately every time you power up, stop there; there is nothing further you can safely do

Which Electrolux models show E94

E94 means the same thing on all 2 of these models. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

AWF8024D3SC · EA2F6820CF

Common questions about Electrolux E94

What does E94 mean on a Electrolux washer dryer?

The washer dryer has found that the wash programme data stored in its own memory doesn't match the check figure it expects, so it refuses to start any cycle. Every time it powers up, the main control board reads its stored configuration and works out a checksum for it, then compares that with the checksum written alongside. The cycle configuration is held in two parts and both must agree; if either doesn't, the board treats the programme data as unreliable and blocks the machine, showing E94. It's a software/configuration fault rather than a mechanical one — nothing to do with pumps, filters or the door.

Can I fix Electrolux E94 myself?

There are 2 checks you can safely do yourself first.

Turn the machine off at the wall socket, leave it a minute, then switch back on — the checksum is only tested at power-up, and a one-off read error can clear.
If the code returns immediately every time you power up, stop there; there is nothing further you can safely do.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Electrolux E94?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E94?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Electrolux washer dryer codes

All Electrolux fault codes and repairs →

What this looks like when it happens

washer dryer not drying

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Electrolux E94 error — washer dryer