What F11 actually means
The oven has a problem with the food (meat) probe circuit and has shut the cooking function down rather than carry on with a reading it doesn't trust.
On Electrolux ovens with the standard power board, the F11 family of alarms relates to the meat probe input — the socket and sensor you plug the temperature spike into. The control board is seeing a signal from that circuit which is outside the range it expects (often a short or moisture across the contacts), so it stops the programme and puts the code up, usually displayed as F111 on the interface. It tends to appear as soon as core-temperature cooking is selected, or partway through a probe-controlled programme.
What F11 looks like on a Electrolux oven
Most people find this page having searched for what the machine is doing rather than the code itself. On a Electrolux oven, F11 usually shows up as one or more of these:
- No function at all
- Dead — nothing lights up
- Lights flashing and nothing happening
- Programme won't start
- Oven tripping the electrics
- F11 flashing on the display
- Beeping and showing F11
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- Moisture or steam in the meat probe socket after a wet cook or a clean
- The probe or its lead damaged, kinked at the plug, or the plug not pushed fully home
- A faulty meat probe sensor
- Corroded or damaged probe socket in the cavity wall
- Fault on the oven's power board reading the probe input
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Unplug the meat probe, check the lead and plug for obvious damage, and leave the socket to dry out fully
- Turn the oven off at the wall for a minute, then power it back up and see if the code clears
- Try a normal cooking function without the probe plugged in — if that runs fine, the fault is in the probe circuit
- If you have a second probe for the same model, try it instead
Which Electrolux models show F11
F11 means the same thing on this model. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.
RZP2401BCX
Common questions about Electrolux F11
What does F11 mean on a Electrolux oven?
The oven has a problem with the food (meat) probe circuit and has shut the cooking function down rather than carry on with a reading it doesn't trust. On Electrolux ovens with the standard power board, the F11 family of alarms relates to the meat probe input — the socket and sensor you plug the temperature spike into. The control board is seeing a signal from that circuit which is outside the range it expects (often a short or moisture across the contacts), so it stops the programme and puts the code up, usually displayed as F111 on the interface. It tends to appear as soon as core-temperature cooking is selected, or partway through a probe-controlled programme.
Can I fix Electrolux F11 myself?
There are 4 checks you can safely do yourself first.
- Unplug the meat probe, check the lead and plug for obvious damage, and leave the socket to dry out fully.
- Turn the oven off at the wall for a minute, then power it back up and see if the code clears.
- Try a normal cooking function without the probe plugged in — if that runs fine, the fault is in the probe circuit.
- If you have a second probe for the same model, try it instead.
This sometimes clears with those checks. If it comes back, it needs looking at properly.
How much does it cost to repair Electrolux F11?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing F11?
This sometimes clears with the checks above. If it comes back, it needs looking at properly. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most oven faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Electrolux oven codes
- Electrolux F14 — The oven's control panel and its main circuit board are not …
- Electrolux F15 — The oven's control panel and its main power board don't agre…
- Electrolux F17 — The oven has lost the power-sharing conversation it holds wi…
- Electrolux F18 — The oven's control board and the hob's control board have st…
- Electrolux F21 — The oven has decided it is already too warm inside to begin …
- Electrolux F23 — The oven's control has read a setting or stored value that i…
- Electrolux F24 — The oven's control panel has lost track of what state the ov…
- Electrolux F25 — The oven has found that its own electronics are running too …
All Electrolux fault codes and repairs →