What F07 actually means
The machine has flagged a problem with the motor that drives the drum, so it has stopped the cycle rather than carry on.
The fault for these washer dryers puts F7 down as a motor error. The control board expects the drum to turn and to report back the right speed; when it doesn't get that, or the motor draws current it isn't happy with, the cycle halts and the code is displayed. The manual's instruction for this one is to call for service rather than attempt anything at home.
What F07 looks like on a Teknix washer dryer
Most people find this page having searched for what the machine is doing rather than the code itself. On a Teknix washer dryer, F07 usually shows up as one or more of these:
- Machine door won't open
- Door won't lock or click shut
- Door lock light flashing
- Door stuck shut with the load inside
- Won't start even with the door closed
- Drum not turning
- Won't spin
- Hums or buzzes but nothing moves
Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.
What usually causes it
- Worn motor brushes or a fault in the motor itself
- A failed or damaged speed sensor on the motor
- A control board fault, or a loose/damaged connection between board and motor
- The drum jammed or heavily overloaded so the motor cannot get it moving
- A foreign object (coin, wire from a bra) wedged where it stops the drum turning
What you can safely check yourself
Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.
- Switch off at the socket for a minute, then power back up and try a short cycle — occasionally it's a one-off trip rather than a hard fault
- Open the door and check the drum turns freely by hand, with no grinding or dragging
- Take some washing out if the load was packed tight and try again with a smaller load
- Check nothing has fallen into the drum that could be jamming it
Which Teknix models show F07
F07 means the same thing on all 4 of these models. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.
TK3W1014XS · TK3W1014XW · TK3W814XS · TK3W814XW
Common questions about Teknix F07
What does F07 mean on a Teknix washer dryer?
The machine has flagged a problem with the motor that drives the drum, so it has stopped the cycle rather than carry on. The fault for these washer dryers puts F7 down as a motor error. The control board expects the drum to turn and to report back the right speed; when it doesn't get that, or the motor draws current it isn't happy with, the cycle halts and the code is displayed. The manual's instruction for this one is to call for service rather than attempt anything at home.
Can I fix Teknix F07 myself?
There are 4 checks you can safely do yourself first.
- Switch off at the socket for a minute, then power back up and try a short cycle — occasionally it's a one-off trip rather than a hard fault.
- Open the door and check the drum turns freely by hand, with no grinding or dragging.
- Take some washing out if the load was packed tight and try again with a smaller load.
- Check nothing has fallen into the drum that could be jamming it.
This one usually needs an engineer once you have tried them.
How much does it cost to repair Teknix F07?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Tried the checks and it's still showing F07?
This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.
What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.
Call 0115 648 0929 Book online — postcode and number is all we need
Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.
Other Teknix washer dryer codes
- Teknix F13 — The machine cannot confirm the door is locked, so it refuses…
- Teknix F14 — The machine has stopped because the door lock isn't behaving…
- Teknix F24 — The machine has sensed more water in the drum than it should…
- Teknix F98 — The washer dryer's control electronics have reported a fault…
- Teknix E02 — The machine can't confirm the door is locked, so it won't st…
- Teknix E04 — The machine has asked for water, waited about 12 minutes, an…
- Teknix E05 — The machine has decided there is too much water inside it an…
- Teknix E08 — The machine has decided there is too much water inside it an…
All Teknix fault codes and repairs →