Out-of-warranty Teknix repairs, done locally
If your Teknix appliance is still under the manufacturer's warranty, go to Teknix first — you should not be paying for that repair. Once it is out of warranty, you do not have to use them, and you will usually wait less and pay less if you do not.
We are a local firm with over 50 years in the trade, covering Nottinghamshire, Derbyshire and Leicestershire. The engineer who comes out is one of ours, not a subcontractor from a national call centre.
What it costs
£66 including VAT for an engineer to come out and diagnose the fault — that is the visit and the diagnosis, with nothing added on top. If it is repaired on the visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide.
Nothing is taken when you book, and every repair carries a 90-day workmanship guarantee — if our work is at fault in that time we come back and put it right at no charge.
What we hold for Teknix
We keep Teknix service documentation in-house, covering 477 Teknix models across 1,044 documents. For Teknix that includes manufacturer parts lists, exploded views and wiring diagrams and service manuals and technical bulletins.
It matters more than it sounds. It means the engineer arrives knowing how your machine comes apart, which part number fits your model rather than one that looks similar, and what the manufacturer says the fault actually is — instead of working it out on your kitchen floor at your expense. Most firms are reading the same user manual you have in the drawer.
Teknix error codes, explained
These are what the codes actually mean rather than a guess. Worth a read before you call anyone — some of them you can clear yourself in five minutes.
Dishwasher
- Teknix E01 — The dishwasher hasn't taken in enough water in the time it allows, so …
- Teknix E03 — The water isn't getting hot, so the dishwasher stops the programme par…
- Teknix E04 — The dishwasher has decided there is too much water inside it and has s…
- Teknix E06 — The dishwasher can no longer read the water temperature — the temperat…
- Teknix E07 — The dishwasher's water temperature sensor is reading a short circuit, …
- Teknix E08 — The valve that switches the water between the upper and lower spray ar…
- Teknix E10 — The dishwasher isn't getting enough water in, so it has stopped before…
- Teknix E30 — The dishwasher has detected water where it shouldn't be and has shut i…
- Teknix H04 — This isn't a fault " H4 is the water hardness setting on your dishwash…
- Teknix H06 — H06 isn't a fault his ddishwasser's water hardness setting, showing th…
Fridge freezer
- Teknix E01 — The fridge section's temperature sensor is no longer giving the contro…
- Teknix E02 — The fridge has lost a sensible reading from the sensor on the fridge's…
- Teknix E03 — The temperature sensor in the freezer section has stopped giving the c…
- Teknix E04 — The sensor that tells the fridge freezer when the frost on its interna…
- Teknix E09 — The fridge freezer has lost a sensible reading from the temperature se…
Washer dryer
- Teknix E02 — The machine can't confirm the door is locked, so it won't start or car…
- Teknix E04 — The machine has asked for water, waited about 12 minutes, and still ha…
- Teknix E05 — The machine has decided there is too much water inside it and has shut…
- Teknix E08 — The machine has decided there is too much water inside it and has shut…
- Teknix F01 — The machine isn't getting enough water in, so it has stopped the cycle…
- Teknix F03 — The machine has tried to pump the water out of the drum, failed to get…
- Teknix F04 — The control board has flagged an internal electronic fault and shut th…
- Teknix F07 — The machine has flagged a problem with the motor that drives the drum,…
- Teknix F13 — The machine cannot confirm the door is locked, so it refuses to start …
- Teknix F14 — The machine has stopped because the door lock isn't behaving as expect…
- Teknix F24 — The machine has sensed more water in the drum than it should ever hold…
- Teknix F98 — The washer dryer's control electronics have reported a fault they can'…
Washing machine
- Teknix F03 — The machine can't get a sensible reading from the sensor that measures…
- Teknix F04 — The machine isn't heating the water as it should, so it has stopped th…
Teknix appliances we repair
- Washing Machine Repairs
- Fridge & Freezer Repairs
- Dishwasher Repairs
- Oven Repairs
- Cooker Repairs
- Tumble Dryer Repairs
- Freezer Repairs
- Washer Dryer Repairs
- Electric & Induction Hob Repairs
- Cooker Hood & Extractor Repairs
Common questions
My Teknix is still under warranty — should I call you?
No. Go to Teknix first, or to the retailer you bought it from. If it is in warranty that repair should not cost you anything, and we would only be charging you for something you can have free. Come to us once it is out of warranty — you are not obliged to use the manufacturer then, and you will usually wait less and pay less.
What does a Teknix repair cost?
£66 including VAT for an engineer to come out and diagnose the fault. If it is fixed on that visit and needs no parts, the total is £84 including VAT. Any parts needed are quoted on site before we fit them — you decide. Nothing is taken when you book.
My Teknix is showing an error code — what does it mean?
We have written up 29 Teknix codes from the manufacturer's own service data, in plain English rather than a guess. They are linked further down this page. Some of them you can clear yourself in five minutes without paying anyone.
Can you get parts for a Teknix?
Usually, yes. We hold the manufacturer's parts lists for 477 Teknix models, so the part is ordered against your actual model number rather than something that looks close. Where a part is genuinely discontinued we will tell you that plainly rather than order it and hope.
Is it worth repairing a Teknix appliance or should I replace it?
That depends on what is wrong and how old it is, and we will tell you straight. If the repair is going to cost more than the machine is worth, we say so — you have paid £66 to find that out, which is a good deal cheaper than replacing something that had five years left in it.
Do you cover my area?
We cover Nottinghamshire, Derbyshire and Leicestershire — the NG, DE and LE postcodes. Put your postcode into the form at the top of the page and it will tell you straight away.
How soon can someone come out?
Same day or next day in most of our area. Tell us what the appliance is doing using the form above and you will get a price and the slots we have left.
Getting someone out
Use the form at the top of the page for a price, call 0115 648 0929, or use the chat in the corner — it can check your postcode and book you in.
