Electrolux E92 washer dryer: what it means & what to check

Stop using it for now. Carrying on with this fault risks further damage or a leak. Switch it off at the wall until it has been looked at.

What E92 actually means

The control panel and the main circuit board inside the machine are speaking different software "languages", so the machine won't run.

Electrolux groups E92 with E93 and E94 as a software configuration fault. Here the user interface board and the main board are running incompatible software or configuration data, so their protocol doesn't match and the machine blocks itself rather than starting a cycle. The code shows on the display and the cycle won't begin — you'll usually see it at switch-on rather than mid-wash.

What E92 looks like on a Electrolux washer dryer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Electrolux washer dryer, E92 usually shows up as one or more of these:

No function at all
Dead — nothing lights up
Lights flashing and nothing happening
Programme won't start
Machine tripping the electrics
E92 flashing on the display
Beeping and showing E92

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

Mismatched software or configuration between the control panel and the main board — often after a board has been replaced or reprogrammed
A faulty user interface board, which is what The fault points to when the code persists
Corrupted configuration data in the control panel's memory
Electrical interference or a supply glitch upsetting the boards on power-up (this type can clear on a restart)

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Turn the machine off at the wall, leave it a minute, then switch back on — Electrolux notes some of these board alarms are temporary and clear with a power-off
If it restarts, cancel and reselect the programme from the selector to reset the cycle

Which Electrolux models show E92

E92 means the same thing on all 2 of these models. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

AWF8024D3SC · EA2F6820CF

Common questions about Electrolux E92

What does E92 mean on a Electrolux washer dryer?

The control panel and the main circuit board inside the machine are speaking different software "languages", so the machine won't run. Electrolux groups E92 with E93 and E94 as a software configuration fault. Here the user interface board and the main board are running incompatible software or configuration data, so their protocol doesn't match and the machine blocks itself rather than starting a cycle. The code shows on the display and the cycle won't begin — you'll usually see it at switch-on rather than mid-wash.

Can I fix Electrolux E92 myself?

There are 2 checks you can safely do yourself first.

Turn the machine off at the wall, leave it a minute, then switch back on — Electrolux notes some of these board alarms are temporary and clear with a power-off.
If it restarts, cancel and reselect the programme from the selector to reset the cycle.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Electrolux E92?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E92?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most washer dryer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Electrolux washer dryer codes

All Electrolux fault codes and repairs →

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Electrolux E92 error — washer dryer