Flavel E05 fridge freezer: what it means & what to check

What E05 actually means

The sensor that tells your fridge freezer how warm and humid the room around it is has stopped reporting properly.

Flavel's control board watches an ambient temperature/humidity sensor so it can adjust how hard the appliance works in a hot or damp kitchen. When the reading from that sensor goes out of range or disappears altogether, the board flags E05 and falls back on default settings rather than reacting to room conditions. Cooling normally carries on, so the first thing most people notice is the blinking code rather than warm food.

What E05 looks like on a Flavel fridge freezer

Most people find this page having searched for what the machine is doing rather than the code itself. On a Flavel fridge freezer, E05 usually shows up as one or more of these:

Fridge freezer door won't open
Door won't lock or click shut
Door lock light flashing
Door stuck shut with the load inside
Won't start even with the door closed
Not cooling
Freezer not freezing
Ice building up at the back

Recognise any of those? That is this fault, and the rest of this page explains what causes it and what you can check yourself.

What usually causes it

A loose or corroded plug on the ambient/humidity sensor — the first check is the cabling
The sensor itself has failed or drifted out of range
Damp getting into the sensor connection, common where the appliance sits in a cold garage or utility room
A control board fault reading the sensor circuit

What you can safely check yourself

Work through these in order. Anything beyond this — panels off, testing parts, anything to do with the wiring — is an engineer's job, and not one to attempt with the machine plugged in.

Turn the appliance off at the socket for a minute, then back on — a genuine one-off glitch can clear
Keep the doors shut as much as possible and don't put hot food straight in; the service notes warn that frequent door opening and hot food make temperature problems worse while the appliance is running on defaults
Check nothing is pressed hard against the back or sides and that there's air space around the cabinet

Which Flavel models show E05

E05 means the same thing on all 2 of these models. If yours is not listed, the explanation above still applies — the code is set by the control board, not the model number.

7248541919 · 7248741919

Common questions about Flavel E05

What does E05 mean on a Flavel fridge freezer?

The sensor that tells your fridge freezer how warm and humid the room around it is has stopped reporting properly. Flavel's control board watches an ambient temperature/humidity sensor so it can adjust how hard the appliance works in a hot or damp kitchen. When the reading from that sensor goes out of range or disappears altogether, the board flags E05 and falls back on default settings rather than reacting to room conditions. Cooling normally carries on, so the first thing most people notice is the blinking code rather than warm food.

Can I fix Flavel E05 myself?

There are 3 checks you can safely do yourself first.

Turn the appliance off at the socket for a minute, then back on — a genuine one-off glitch can clear.
Keep the doors shut as much as possible and don't put hot food straight in; the service notes warn that frequent door opening and hot food make temperature problems worse while the appliance is running on defaults.
Check nothing is pressed hard against the back or sides and that there's air space around the cabinet.

This one usually needs an engineer once you have tried them.

How much does it cost to repair Flavel E05?

£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Tried the checks and it's still showing E05?

This one usually needs an engineer once you have tried the checks above. Then it wants someone who can open it up.

What it costs, before you call: the price is the same whatever the fault turns out to be — £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.

Our own engineers, not a call centre. We cover Nottinghamshire, Derbyshire and Leicestershire — most fridge freezer faults are seen same day or next day.

Call 0115 648 0929 Book online — postcode and number is all we need

Outside our area? The explanation above still stands — take it to a local engineer and tell them the code. Knowing it saves them time and you money.

Other Flavel fridge freezer codes

All Flavel fault codes and repairs →

What this looks like when it happens

Repairs we cover near you

Written by the engineers at ASAP Repairs, 0115 648 0929. We repair these machines for a living in Nottinghamshire, Derbyshire and Leicestershire.

Flavel E05 error — fridge freezer