What is actually happening
Genuinely dead is usually a supply problem rather than the machine. Before anything else it is worth proving the socket, because a tripped RCD or a failed plug fuse accounts for a good share of these. Where the supply is proven good, the fault is normally the mains filter, the on/off switch or the control board.
The Grundig fault codes that point at this
A Grundig washing machine will usually tell you what it thinks is wrong before anyone opens it up. These are the codes we hold for this make that relate to will not turn on:
- E02 — The machine can't heat the water he heating element, so it has stopped and flagged the heater as electrically broken.
- E03 — The machine has spotted that the heating element is staying on when it shouldn't, so it has stopped the wash to avoid boiling your laundry.
- E04 — The machine has spotted that the part of the control board which switches the water inlet valves on and off has failed shut, so water can keep pouring in whether the machine wants it or not.
- E05 — The machine can't get the water out — the drain pump either isn't running or is blocked.
- E06 — The control board's switching component for the drum motor has failed short, so the machine can no longer control the motor properly and stops the programme.
- E07 — The machine can't get a sensible reading from the sensor that tells it how much water is in the drum, so it stops rather than risk filling or draining blind.
- E08 — The machine hasn't got enough water in the drum in the time it expects, so it has stopped and flagged a water supply problem.
- E09 — The machine can't lock the door, so it refuses to start filling or washing.
If yours is showing one of those, that is a much shorter conversation than a general fault — tell us the code when you book and the engineer can often carry the part.
The usual causes on a Grundig washing machine
- A tripped RCD or breaker in the consumer unit, often caused by the machine itself
- A blown plug fuse or a failed socket
- A failed mains interference filter — a common failure and an easy one to test
- A failed on/off switch or door switch
- A failed control board
What you can safely check yourself
- Plug something you know works into the same socket
- Check the consumer unit for a tripped breaker or RCD
- Check the plug fuse
- If the RCD trips again the moment the machine is switched on, stop and leave it off — that is an electrical fault, not a nuisance trip
Still will not turn on?
Most of these need an engineer once the checks above are done. £66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Our engineers work on Grundig machines week in, week out, so they arrive knowing the machine rather than reading the back of it. Local engineers across Nottinghamshire, Derbyshire and Leicestershire.
Call 0115 648 0929 Book online — postcode and number is all we need
Common questions
Why is my Grundig washing machine will not turn on?
No lights, no display and no response — the machine appears completely dead. Genuinely dead is usually a supply problem rather than the machine. Before anything else it is worth proving the socket, because a tripped RCD or a failed plug fuse accounts for a good share of these. Where the supply is proven good, the fault is normally the mains filter, the on/off switch or the control board.
Can I fix a Grundig washing machine will not turn on myself?
Plug something you know works into the same socket. Check the consumer unit for a tripped breaker or RCD. Check the plug fuse. If the RCD trips again the moment the machine is switched on, stop and leave it off — that is an electrical fault, not a nuisance trip. Beyond those checks this one normally needs an engineer.
What Grundig error codes mean will not turn on?
Grundig washing machines report this through their own fault codes. The ones that point at will not turn on are E02, E03, E04, E05, E06, E07. If your machine is showing one of those, that narrows it down considerably — each has its own guide on this site.
How much does a Grundig washing machine repair cost?
£66 including VAT for an engineer to come out and diagnose it, or £84 in total including VAT if it is put right on the visit and no parts are needed. Any parts needed are quoted on site before we fit them — you decide. Every repair carries a 90-day workmanship guarantee.
Other Grundig washing machine faults
- washing machine not draining
- washing machine not spinning
- washing machine leaking water
- washing machine making a loud noise
- washing machine not heating the water
- washing machine door will not open